- Feedback
- View
Offered for sale are a set of Project 2 style straight legged cro-mo forks with Spinner drop-outs.
I put these side by side with a 'proper' set of P2 and there is not much difference. The P2's were the triple butted model so were finished just a wee bit nice than these.
I've sanded them back to check for any rust but they are pretty solid, ripe for a powder coat or rattle can black.
Axle to crown appears to be 400mm if I've measured it right, same as the TB P2's I have.
1 1/8 steerer at a nice usable 250mm!
£29 GBP UK posted
I put these side by side with a 'proper' set of P2 and there is not much difference. The P2's were the triple butted model so were finished just a wee bit nice than these.
I've sanded them back to check for any rust but they are pretty solid, ripe for a powder coat or rattle can black.
Axle to crown appears to be 400mm if I've measured it right, same as the TB P2's I have.
1 1/8 steerer at a nice usable 250mm!
£29 GBP UK posted
