Wanted XT UN71 Bottom Bracket...

I might have one laying around someplace - it's spare since I upgraded to a Hollowtech II...

Though the one I have *might* be a UN72... I also have a couple of UN54's but can't see a use for those.

I'd have to dig around (would also have to measure them as I think my axles may be shorter than 122mm
 
Elysarian":33cv6thn said:
I might have one laying around someplace - it's spare since I upgraded to a Hollowtech II...

Though the one I have *might* be a UN72... I also have a couple of UN54's but can't see a use for those.

I'd have to dig around (would also have to measure them as I think my axles may be shorter than 122mm

Well if its the right size let me know I am open to differing options...
 
Dug them out this evening, I have two UN72's and one UN52.

Sizes are:

UN72 @ 120x73
UN72 @ 113x73
UN52 @ 113x73

I forgot that, while I do have a 68mm BB shell I also have an E-Type front mech... sorry to build your hopes up :(
 
Elysarian":2fuy0uhq said:
Dug them out this evening, I have two UN72's and one UN52.

Sizes are:

UN72 @ 120x73
UN72 @ 113x73
UN52 @ 113x73

I forgot that, while I do have a 68mm BB shell I also have an E-Type front mech... sorry to build your hopes up :(


No worries thanks all the same!

Doug
 
Got an old school XT 68 x 122.5 in really good nick £18 posted if you're interested.

8556612179_74ba4341ff_z.jpg


8556614043_818140e9a6_z.jpg


8556613299_8e8a9f00d2_z.jpg


Cheers
Ian
 
cooie":xo957d93 said:
Got an old school XT 68 x 122.5 in really good nick £18 posted if you're interested.

8556612179_74ba4341ff_z.jpg


8556614043_818140e9a6_z.jpg


8556613299_8e8a9f00d2_z.jpg


Cheers
Ian

Thanks but really want a low maintenance cartridge one!
 
Back
Top