Chris King Nothreadset come with Split Top Race? wobble prob

ibbz

Gold Trader
rBotM Winner
Karma King
Dyna-Tech Fan
Feedback
View
I was wondering whether the CK nothreadset comes with a top race.
There wasn't one with my frame/headset.
As I am having problems with it.
I fit it, tighten it and there's still lateral movement, left to right wobble with the steerer.bars/fork and the Bearing cap ring ontop of the top cup shifts/slides from side to side- it behaves like when say another different make A- headset lacks a top race thing

Any advice?
Is the position of the starnut critical perhaps?
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Is it an older one with the O ring in the top race to take up the clearance? If so, there's your problem. The O ring gets flattened over time and allows some slack to appear.
A new O ring would go some way towards curing it but in my opinion it was a pretty rubbish system for what was thought to be a top-flight product.
I believe that CK didn't use the split compression ring to avoid having to pay royalties to Cane Creek - I could be wrong of course.
I never use anything but Cane Creek....
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Could be simply that your top cap doesn't have enough room spare to take up all the slack before hitting the steerer tube. I the above, or something else?
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Ill take some snaps and show what the headset is like.
Not sure I have an O ring. Is that the split ring ?
Seems I may be lacking a part perhaps?
 
Re: Chris King Nothreadset come with Split Top Race? wobble

ibbz":rmu7u674 said:
Ill take some snaps and show what the headset is like.
Not sure I have an O ring. Is that the split ring ?
Seems I may be lacking a part perhaps?
This thread here explains it all.Well, the bit about the O ring anyway.
 
Re: Chris King Nothreadset come with Split Top Race? wobble

ishaw":1c626hbt said:
Could be simply that your top cap doesn't have enough room spare to take up all the slack before hitting the steerer tube. I the above, or something else?


so just add another spacer. seems like the most likely problem. no?
 
Re: Chris King Nothreadset come with Split Top Race? wobble

PeteC":18rs7pmm said:
ishaw":18rs7pmm said:
Could be simply that your top cap doesn't have enough room spare to take up all the slack before hitting the steerer tube. I the above, or something else?


so just add another spacer. seems like the most likely problem. no?
Not necessarily, you might need one of these.
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Andy R":3m11wqbb said:
PeteC":3m11wqbb said:
ishaw":3m11wqbb said:
Could be simply that your top cap doesn't have enough room spare to take up all the slack before hitting the steerer tube. I the above, or something else?


so just add another spacer. seems like the most likely problem. no?
Not necessarily, you might need one of these.

Fair enough. But I didn't say it was an absolute solution, just the easiest/most obvious.
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Andy R":1wjfa06g said:
ibbz":1wjfa06g said:
Ill take some snaps and show what the headset is like.
Not sure I have an O ring. Is that the split ring ?
Seems I may be lacking a part perhaps?
This thread here explains it all.Well, the bit about the O ring anyway.


`explains hell of a lot!
Thanks man, tomorrow I will try and sort the problem out according to the advice and hints here!

Thanks so very much!
 
Re: Chris King Nothreadset come with Split Top Race? wobble

Andy R":2ick5l92 said:
PeteC":2ick5l92 said:
ishaw":2ick5l92 said:
Could be simply that your top cap doesn't have enough room spare to take up all the slack before hitting the steerer tube. I the above, or something else?


so just add another spacer. seems like the most likely problem. no?
Not necessarily, you might need one of these.


Thanks man! I guess this takes the place of the Cane Creek type O ring! :)
I will go for it
 
Back
Top