Xt M730, pace Rings, XLite, Wildgripper Sprint S Green
- Thread starter ibbz
- Start date
- Feedback
- View
Re: X-Lite camlocks +stem cap/plug+ Marzocchi Z3 TFT £50
Interested in forks - can I dib pending a check on what steerer length I need? Will be back home today to check.
Interested in forks - can I dib pending a check on what steerer length I need? Will be back home today to check.
Re: X-Lite camlocks +stem cap/plug+ Marzocchi Z3 TFT £50
Stuff still for SALE.
STILL STUFF LEFT BELOW
In addition to below I am selling:
(I will post pics and full spec/prices tomorrow)
a set of Mavic M231 CD Rims with XT M732 Hubs - The Front Hub is smooth as silk, Rear Hub bearings are good but wearing so I include a NOS XT M732 Rear Hub with it! PLUS a 7 speed IG lightweight cassette which is a beaut!
£100 delivered.
A Set of Mavic M231 (Silver) Rims with XTR M900 Hubs + XTR 8 speed cassette - £150 delivered.
XTR UN90 BB NOS - £25 posted (will get the size later today or tomorrow)
Avid SD 7 black levers in good condition -
USE straight bar PLUS bar ends -
USE alloy seat post -
Sunn Ringle rings - mid and outer - good condition - will post size tomorrow
Pace Rings (mid and outer) on XT M730 cranks - will post size/price tomorrow
XT front mech -
LX front mech -
Suntour XC Pro shifters (thumbies) -
Suntour XC Pro rear mech -
Syncros Cattlehead in red - tatty - so free - just pay postage
Mavic Bottom Bracket - will post size tomorrow - needs TLC £15 posted
Will adjust prices and post pictures of these today or tomorrow.
I'm selling loads of X-Lite goodies, plus other stuff - Prices inc. Delivery to BRITAIN ONLY.
Paypal Gift Please (or pay PP fee's)
PRICE DROPPED - EVERYTHING MUST GO
Everything here is from Mint to good used condition, bar some details I'll explain.
Prices are not fixed. if too high, please Offer. Any serious offers considered.
Please leave message here first - cheers!
Will aim to post within TWO business days.
If you're Happy Leave Feedback, if Unhappy please let me know.
X-LITE
X-Lite Stem Plug - Blue. (boxed) NOS £10
X-Lite M10 Pivot Plugs - Silver. (boxed) NOS £8
X-Lite QR Camlock Seat Collar - Black (boxed - no end bolt on left side as seen in picture) think 28.6mm £10
X-Lite QR Camlock Seat Collar - Grey (no end bolt on left side as seen in picture) 34.9mm (used) £10
X-Lite QR Camlock Seat Collar - Black (with a shim) complete. 31.4mm £10
Raceface Evolve stem - red/black, (good condition slight fading to front logo as shown) £10
I'm selling my Marzocchi Z3 as they're too much travel for my M-Trax
They have 80mm travel
175 mm Steerer
Polished, and in very nice condition.
Working perfectly, and they were TF Tuned so are very nice!
I only rode them TWICE - steerer cut to 175mm with star nut fitted
This is what the previous owner said about them;
I bought these year 2000 Marzocchis for a retro Zaskar build over 2 years ago for £100.00 I painted the upper bridge carefully in silver/chrome and polished the lowers. They were also TF tuned for £80.00. I then rode them approx. 10 times before hanging up. I think they are 80mm travel but measuring the stansions they could be 100mm. The stansions are lovely and they go up and down really well for an older set of forks. They looked great on my polished zaskar frame! The lawyer tabs on the bottom although well worn as expected never caused me a problem as there is still a lip to grip on. Happy bidding!
Length from top of crown next to the adjuster to the quick release lugs at the bottom = 440mm Length of exposed stantion (gold bit) from bottom of crown to seal = 110mm (this leads me to believe that they are 80mm as I would be surprised if there was just 10mm clean. I know for a fact that when I rode them I did not get travel almost to the top of the stantion) I hope this helps Cheers
I'm looking for £50 (exc Postage) or offer (PM me)
Stuff still for SALE.
STILL STUFF LEFT BELOW
In addition to below I am selling:
(I will post pics and full spec/prices tomorrow)
a set of Mavic M231 CD Rims with XT M732 Hubs - The Front Hub is smooth as silk, Rear Hub bearings are good but wearing so I include a NOS XT M732 Rear Hub with it! PLUS a 7 speed IG lightweight cassette which is a beaut!
£100 delivered.
A Set of Mavic M231 (Silver) Rims with XTR M900 Hubs + XTR 8 speed cassette - £150 delivered.
XTR UN90 BB NOS - £25 posted (will get the size later today or tomorrow)
Avid SD 7 black levers in good condition -
USE straight bar PLUS bar ends -
USE alloy seat post -
Sunn Ringle rings - mid and outer - good condition - will post size tomorrow
Pace Rings (mid and outer) on XT M730 cranks - will post size/price tomorrow
XT front mech -
LX front mech -
Suntour XC Pro shifters (thumbies) -
Suntour XC Pro rear mech -
Syncros Cattlehead in red - tatty - so free - just pay postage
Mavic Bottom Bracket - will post size tomorrow - needs TLC £15 posted
Will adjust prices and post pictures of these today or tomorrow.
I'm selling loads of X-Lite goodies, plus other stuff - Prices inc. Delivery to BRITAIN ONLY.
Paypal Gift Please (or pay PP fee's)
PRICE DROPPED - EVERYTHING MUST GO
Everything here is from Mint to good used condition, bar some details I'll explain.
Prices are not fixed. if too high, please Offer. Any serious offers considered.
Please leave message here first - cheers!
Will aim to post within TWO business days.
If you're Happy Leave Feedback, if Unhappy please let me know.
X-LITE
X-Lite Stem Plug - Blue. (boxed) NOS £10
X-Lite M10 Pivot Plugs - Silver. (boxed) NOS £8
X-Lite QR Camlock Seat Collar - Black (boxed - no end bolt on left side as seen in picture) think 28.6mm £10
X-Lite QR Camlock Seat Collar - Grey (no end bolt on left side as seen in picture) 34.9mm (used) £10
X-Lite QR Camlock Seat Collar - Black (with a shim) complete. 31.4mm £10
Raceface Evolve stem - red/black, (good condition slight fading to front logo as shown) £10
I'm selling my Marzocchi Z3 as they're too much travel for my M-Trax
They have 80mm travel
175 mm Steerer
Polished, and in very nice condition.
Working perfectly, and they were TF Tuned so are very nice!
I only rode them TWICE - steerer cut to 175mm with star nut fitted
This is what the previous owner said about them;
I bought these year 2000 Marzocchis for a retro Zaskar build over 2 years ago for £100.00 I painted the upper bridge carefully in silver/chrome and polished the lowers. They were also TF tuned for £80.00. I then rode them approx. 10 times before hanging up. I think they are 80mm travel but measuring the stansions they could be 100mm. The stansions are lovely and they go up and down really well for an older set of forks. They looked great on my polished zaskar frame! The lawyer tabs on the bottom although well worn as expected never caused me a problem as there is still a lip to grip on. Happy bidding!
Length from top of crown next to the adjuster to the quick release lugs at the bottom = 440mm Length of exposed stantion (gold bit) from bottom of crown to seal = 110mm (this leads me to believe that they are 80mm as I would be surprised if there was just 10mm clean. I know for a fact that when I rode them I did not get travel almost to the top of the stantion) I hope this helps Cheers
I'm looking for £50 (exc Postage) or offer (PM me)
