LTS-DH 1997 - Finally Finished!

DomLake

Dirt Disciple
My new pride & joy, a 1997 LTS-DH.

The parts are far from retro so please be gentle :oops:

20062008148ag1.jpg


20062008151rh4.jpg


Frame: 1997 GT LTS-DH With Full BETD Bearing Kit

Fork: Rockshox Boxxer Ride U-Turn
Rear Shock: Rockshox Super Deluxe Long Travel

Headset: FSA Orbit MX
Stem: Raceface Diabolus DH
Handlebar: Raceface Evolve DH
Grips: ODI Yeti Lock-On's

Brakes: Avid Codes 203mm Front 185mm Rear

Shifters: Sram X9
Front Derailleur: Sram X7
Rear Derailleur: Sram X9
Derailleur Cables: Avid Flak Jackets

Cranks: Shimano Hone
Chainrings: 22, 32 & Bashgaurd
Pedals: DMR V8's

Rims: Mavic Dee-Max
Hubs: Mavic Dee-Max
Tyres: Continental Mountain King 2.4 Front 2.2 Rear Folding
Saddle: SDG Bel-Air ST I-Beam
Seatpost: SDG I-Beam

Cheers.
 
Very nice :cool:

Mine's came with Hope C2's when i bought it used about eight years ago,

here's the rear mount if it helps, dont know if it's home made or an off the shelf item ?

rearbrake.jpg


Also just for the hell of it here's how my LTS is at the moment :)

bareframe.jpg
 
jimihendrix":1bwr7wlm said:
Very nice :cool:

Mine's came with Hope C2's when i bought it used about eight years ago,

here's the rear mount if it helps, dont know if it's home made or an off the shelf item ?

rearbrake.jpg


Also just for the hell of it here's how my LTS is at the moment :)

bareframe.jpg

I believe I've got a 1/2 caliper the same as 1 pictured if anyone needs 1 :)
 
jimihendrix":12fioq5l said:
Very nice :cool:

Mine's came with Hope C2's when i bought it used about eight years ago,

here's the rear mount if it helps, dont know if it's home made or an off the shelf item ?

Also just for the hell of it here's how my LTS is at the moment :)

Lovely bike you have there matey :D

Got a set of avid codes to go on, but really been struggling to find a good quality mount.

So i've been looking into having one made. Its in its early stages but here is a mount i'm working on.

Just need a few interested LTS owners and a machine shop now :?

mountvh7.jpg
 
Probably not the greatest solution but I had an LTS and an A2Z adapter fit on the flat rear drop outs fine.
 
haribo":3j2cse9o said:
Probably not the greatest solution but I had an LTS and an A2Z adapter fit on the flat rear drop outs fine.

That should be fine until I can get my solution sorted, thanks :)
 
jimihendrix said:
Very nice :cool:

Mine's came with Hope C2's when i bought it used about eight years ago,

here's the rear mount if it helps, dont know if it's home made or an off the shelf item ?

rearbrake.jpg


It's a caliper LOBO specific , he's need a Big'un hub specific too ...
 
Hi there,

not been around much latley but I will include a link to my thread for both my LTS 1000's one is original spec, the other is a new build of a frame that had remained unbuilt until last janurary.

One of the frames I added an after market BETD disc addaptor and luckily the new build came with a disc specific rear end.

I know BETD do 2 versions of their disc addaptor, one for the later rear ends that came with 2 mounting holes and then a self fix option that requires you to drill into the rear drop out.

The link to my thread is :-

http://www.retrobike.co.uk/forum/viewto ... hlight=lts

Hope this helps
 
Thanks for the post,

You have two really nice bikes there btw :cool:

Do you know of anyone who has gone the self-fix route?

Cheers
 
Back
Top