Raleigh Dyna Tech appreciation and information thread

zaskar96":14h45but said:

ibbz":14h45but said:

Looks like an MT4 or Ogre if it were silver/black - like mine.
A later one, as the cable runs are at the side of the top tube.
Mine's older, note the different routings.

Click to expand...

I used to think it was an MT4 but the paint finish was a bit different and also the seat stay/seat tube join, was originaly like this but black...

Didn't have the Dyna-Tech sticker on the seat tube though.

Click to expand...

mattr":19cpcbpq said:

It was suggested that I post this up on here.
So I am...

its missing the original forks (quake air) that are in the attic, non-functional. Blew a seal in them, and couldn't get them repaired. Won't hold air anymore. 2003 RC36 stealth at 80mm on there now, spinning on a hope headset (the ones we got on the stock bikes only lasted a few weeks at best, so it had a WTB grease guard from another bike fitted, which lasted about 15 years, eventually)Wheels (Hope/217, then goldtec/217) ended up on a mates bike, that got nicked. So some crossrides from a training bike on there now (IIRC a few team mates had the original crossmax as a standard fit, but with SIDs instead of the Ronds.)
Middleburn spider on there (and rings) the XTR ones lasted for ages (about a season), but at the thick end of 150 quid for a new set and a long wait for parts, i got that set for about 80 instead!
Rest of it is pretty much as it was when i last raced it at the Thetford NPS, 2001.
Probably didn't use the mud tyres tho ;o)

Got a "spare" v-brake only frame as well. Raced that in 98 and 99. Will be hanging it up on the wall once i get round to it

I rode for the raleigh factory team from about 98 or 99 to 2001 (when the team folded) this one was the race bike, i had another one for training (that i snapped and that was replaced) I started racing again when i emigrated, so it was pretty much untouched from 01 (when i quit) to about 07, then replaced in 09.
Still riding an old R700 custom and one of Nick Craigs old CX bikes as well (made by Raleigh, badged up as a diamond back, then rebadged as a raleigh for me to race on)

Click to expand...

Dynatechrider":1vq474w9 said:

Hi friends of the Nottingham bike company,

Today in Mainhatten snowdrift and my Mtrax Ti 2000, I love this bike, it has done a hard work during the last years. It made me always faithful service . In this way, I would like to say thank you very much, to all staff of the Raleigh special product Diffision for your good work , that allows all of us to spend time on a wonderful piece of bike history in springtime, summer, autumn, winter.






Enjoy your ride

Wolfgang

Click to expand...

Dynatechrider":3ll8enf5 said:

Currently, my Raleigh Special Product Collection includes:

1 Dynatech MT4 with Shimano XTR 900 of 1993
1 Dynatech MT4 with Shimano XT737 assembled in Dec. 1993
1 Dynatech Voyager with a Campagnolo group of 1991
1 Dynatech Voyager with a Shimano XT of 1991 custom build
1 Dynatech OGRE XT of 1992
1 MT 500 of 1993
1 Torus FS with XTR 900 of 1994
1 Torus XT/Magura by 1995
The M Trax TI 2000 from 1995
1 Dynatech C 1000 race of 1994,
1 United States design XTR 900 with Judy SL based on the
1 United States design XTR 900 with V-brakes XT 739 rigid
1 Technium United States peak of 1992
1 Technium United States chill of 1992.

Current Project

1 Dynatech Diablo DX of 1992
1 Dynatech XC 60 or 1992

Former Bikes has been stolen :evil:

1 Dynatech MT 600 of 1993 upgraded with Syncros parts, Shimano XT 737 Group set and RS Mag 21
1 Dynatech Diablo SE of 1994 pimped with Syncros parts, Shimano XT 737 Group set and Tioga Revolver
1 Torus FS polished of 1994, custom build with Syncros Ti bar and Ti seat post, Syncros Stem polished and XTR 900 group set

Broken bikes

1 Torus FS polished of 1994 with RS Mag 21, Syncros Parts and XTR 900 group set. Therefore I’ve got the Torus of 1995 from Raleigh UK


The provisional conclusion should be the Raleigh special products RSP 600 titanium by markwashington using, but not wanted to send to Germany :cry: .

Best regards from Mainhatten

Click to expand...

ibbz":17f9s9xi said:

Dynatechrider":17f9s9xi said:

Currently, my Raleigh Special Product Collection includes:

1 Dynatech MT4 with Shimano XTR 900 of 1993
1 Dynatech MT4 with Shimano XT737 assembled in Dec. 1993
1 Dynatech Voyager with a Campagnolo group of 1991
1 Dynatech Voyager with a Shimano XT of 1991 custom build
1 Dynatech OGRE XT of 1992
1 MT 500 of 1993
1 Torus FS with XTR 900 of 1994
1 Torus XT/Magura by 1995
The M Trax TI 2000 from 1995
1 Dynatech C 1000 race of 1994,
1 United States design XTR 900 with Judy SL based on the
1 United States design XTR 900 with V-brakes XT 739 rigid
1 Technium United States peak of 1992
1 Technium United States chill of 1992.

Current Project

1 Dynatech Diablo DX of 1992
1 Dynatech XC 60 or 1992

Former Bikes has been stolen :evil:

1 Dynatech MT 600 of 1993 upgraded with Syncros parts, Shimano XT 737 Group set and RS Mag 21
1 Dynatech Diablo SE of 1994 pimped with Syncros parts, Shimano XT 737 Group set and Tioga Revolver
1 Torus FS polished of 1994, custom build with Syncros Ti bar and Ti seat post, Syncros Stem polished and XTR 900 group set

Broken bikes

1 Torus FS polished of 1994 with RS Mag 21, Syncros Parts and XTR 900 group set. Therefore I’ve got the Torus of 1995 from Raleigh UK


The provisional conclusion should be the Raleigh special products RSP 600 titanium by markwashington using, but not wanted to send to Germany :cry: .

Best regards from Mainhatten

Click to expand...

Jesus!!
That is a very Impressive collection!!

Click to expand...

BFG Bronco":2qc5rmvo said:

New member alert.
A DynaTech was my first MTB from way back when. I went to school with Barrie Clarke who rode for Raleigh for years. My DT is now in the hands of my brother who did the Windsor triathlon on it and passed a few carbon racers on the way round too.

Click to expand...