Bars & Stems, 26.8mm I beam seatpost, crossmax wheelset

House move imminent so clearing the decks

1. 26.8mm x 350mm black I beam seatpost - £15 SOLD on ebay
2. Truvativ flat bars (31.8mm x 580mm wide) + PLT Pro stem (140mm x 31.8mm) + Shimano R550 brake levers (for road type cantilver brakes) - £20 SOLD
3. Raceface Deus XC riser bars (25.4mm x 625mm) + FSA xc120 stem (105mm x 6deg) £15 SOLD on ebay
4. Raceface Deus XC riser bars (25.4mm x 620mm) + FSA xc170 stem (90mm x 6deg) £15 - SOLD
5. Exotic Scandium Riser Bars (25.4mm x 620mm) + Ritchey WCS stem (110mm x 6deg?) - very light only 290g together £20 posted - currently on ebay.
6. Mavic Crossmax tubeless vee brake wheelset, good bearings, both wheels need slight trueing, one nipple on rear wheel needs replacing, some wear & bubbling on ceramic vee brake surface. £75 SOLD
7. Cannondale flame saddle, one small nick £10 posted
8. XTR m953 front mech 34.9mm bottom pull, tatty but functional £7.50 SOLD

Thats it for now, photos here:- http://www.flickr.com/photos/48687436@N ... 512250724/

Reply here & backup with pm please.

Pm incom9mg

crossmax wheelset SOLD

Interested in No.5; what's the sweep on the bars please?

Pm sent re XTR front changer.

Interested in No.5; what's the sweep on the bars please?

Click to expand...

will get back to you later on that one

Cool, no panic at all, cheers!

Don't actually know what the sweep is, but it is these bars: http://www.carboncycles.cc/?s=0&t=2&c=69&p=629&

& the sweep amounts to about 30mm at the end of the bar, so 30mm over 310mm - whatever angle that equates to.

Ah, didn't realise that they were risers, no good to me, sorry!

Ah, didn't realise that they were risers, no good to me, sorry!

Click to expand...

My bad original listing now edited.