DIY Almarc-like leather handlebar cover

predki · Jan 31, 2013

I'm looking for a pair of 700c x 23 amber wall tyres, they seem to be hard to find these days!

There are some clinchers, usually quite expensive and have mixed reviews about durability. There are always cheap tubulars around.

hmmm... here's quite good offer: http://www.planet-x-bikes.co.uk/i/q/TYC ... bular_tyre
these slightly narrower: http://www.planet-x-bikes.co.uk/i/q/TYV ... lding_tyre
or these: http://www.planet-x-bikes.co.uk/i/q/TYV ... ncher_tyre (these out of stock currently)

The cables were already fitted when I bought my Crowther but I've seen similar cables on Ebay. It not always easy to tell from the photo's but It looks like Campagnolo do a transparent red cable set, if you're feeling flush

I thought so. Anyway GB rebuild is not priority atm anyway, so will wait until spring/summer.

Robbied196 · Jan 31, 2013

Thanks for the links, its clinchers I'm looking for. I like the look of the Vittoria Open Corsa's, I will have to plan how I can get £80 worth of tyres past the wife

lewisfoto · Feb 1, 2013

to echo the rest very fine work

Tel · Feb 4, 2013

Inspiring stuff! I'll be giving that a go...well when I say "I" I actually mean I know a man that should be a dab hand at that. Robbie I need some white strips of leather have you got a link to your seller?

Robbied196 · Feb 4, 2013

Tel":zvwkb2xq said:
Inspiring stuff! I'll be giving that a go...well when I say "I" I actually mean I know a man that should be a dab hand at that. Robbie I need some white strips of leather have you got a link to your seller?

Hi Tel

I used this one: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 7617375484

Just be careful about the length you need on my Cinelli bars I was just 5mm over! You maybe able to ask them to cut it slightly longer.

There's also this which looks quite good: http://www.ebay.co.uk/itm/130832463508? ... 1423.l2649

mattr · May 31, 2013

That is a true work of art.

Will look fantastic on my next build.......... unless I cock it up!

Geoffthechef · Jun 25, 2013

Can i just point to this item that may be of help to you all working with leather?...Most seamen used these for canvas work when i was at sea...I have one and it has been a godsend over the years.

http://www.ebay.co.uk/itm/Genuine-Leath ... 1c311f4207

Midorimage · Jun 26, 2013

Your handle bar wrap looks really nice...

mrcpea · Dec 30, 2013

Superb stuff. I have to try this.
Getting a big enough piece of leather seems hard as most sellers on the bay are selling 20cm x 20cm pieces.
Anyone got any idea as to where a bigger piece might be bought?

Again, most excellent work

Turbotandem · Aug 12, 2015

Re: leather sew on bars

Thanks for the good information. My project below. I chose to double the thread as done in a true baseball stitch. Worked well for synching up the leather without tearing it. 1.2mm leather. Took 400cm of thread per side. Project was complicated by the brake cables under the leather. I chose to have the cable exit the wrap thru the sewn seem only just under the brake hood and just before the cable housing enters the brake body under the hood. Only a couple mm to work with there. The leather I used was soft "upolstery" leather so did not need to be wetted. I also have some padding under the leather over top of the bars; used a strip of the old cork/synthetic bar wrap as padding.

DIY Almarc-like leather handlebar cover

predki

Retro Guru

Robbied196

Senior Retro Guru

lewisfoto

Tel

Robbied196

Senior Retro Guru

mattr

Old School Grand Master

Geoffthechef

Retro Newbie

Midorimage

Old School Hero

mrcpea

Retro Guru

Turbotandem

Retro Newbie

Attachments

Similar threads

Latest posts