GearlessinSeattle
Senior Retro Guru
Okay folks, time to clean house again.
Problem with not having a job is that I start to clean and organize.
Kona Hot TET frameset with P2-$275us shipped
17" C-C 20" C-T and 22.5 C-C top tube
This frameset is in okay shape. I say okay because there is a ding/dent on the bottom right/driveside chainstay. It is not bad but it is there. Other then that, paint is in good shape.
No headset included. I might be able to find a Impact that I used to have.
Klein MC1 1"-Rascal, Pinnacle-150mm long and 23" wide. $100us @@@sold@@@
Unpainted and there might be a slight bend in the left side. Hard to tell.
see photos.
Green No logo King Headset- $120us ####SOLD####
This is a 1 1/8th but has a reducer on it so it would fit 1 1/4. Yeti?
Just not sure how to get the reducer off? Dremel?
Blue Cook Skewers-$160us ####SOLD####
Great shape with only slight wear/scratches on the levers.
NOS Green Control Tech bar-$75us shipped
Never mounted.
Blue/Turquoise Avid Tri Aligns-$175 shipped@@@sold@@@@
These are in great shape with just one minor flaw, one of the retaining bolts is rusted. Comes with matching hangers.
Red Altek V Levers-$140us ####SOLD####
These have a little scuff mark on the left lever and up close you can see it but from 2-3 feet.....
NOS RED Control Tech Canti Brakes-$160us @@@sold@@@
I mounted these on a frame but never used them.
Comes with instructions and used Kool stop brake pads.
Red Race Face Turbine Cranks 175mm and 110 BCD-$100us shipped
Good shape but have been used.
Please PM with any questions.
More Photos' here:
http://www.flickr.com/photos/88469219@N ... 643625320/
IMG_2599 by gearlessinseattle, on Flickr
IMG_2604 by gearlessinseattle, on Flickr
IMG_2611 by gearlessinseattle, on Flickr
IMG_2615 by gearlessinseattle, on Flickr
IMG_2622 by gearlessinseattle, on Flickr
IMG_2623 by gearlessinseattle, on Flickr
IMG_2628 by gearlessinseattle, on Flickr
IMG_2638 by gearlessinseattle, on Flickr
IMG_2634 by gearlessinseattle, on Flickr
Problem with not having a job is that I start to clean and organize.
Kona Hot TET frameset with P2-$275us shipped
17" C-C 20" C-T and 22.5 C-C top tube
This frameset is in okay shape. I say okay because there is a ding/dent on the bottom right/driveside chainstay. It is not bad but it is there. Other then that, paint is in good shape.
No headset included. I might be able to find a Impact that I used to have.
Klein MC1 1"-Rascal, Pinnacle-150mm long and 23" wide. $100us @@@sold@@@
Unpainted and there might be a slight bend in the left side. Hard to tell.
see photos.
Green No logo King Headset- $120us ####SOLD####
This is a 1 1/8th but has a reducer on it so it would fit 1 1/4. Yeti?
Just not sure how to get the reducer off? Dremel?
Blue Cook Skewers-$160us ####SOLD####
Great shape with only slight wear/scratches on the levers.
NOS Green Control Tech bar-$75us shipped
Never mounted.
Blue/Turquoise Avid Tri Aligns-$175 shipped@@@sold@@@@
These are in great shape with just one minor flaw, one of the retaining bolts is rusted.
Comes with matching hangers.Red Altek V Levers-$140us ####SOLD####
These have a little scuff mark on the left lever and up close you can see it but from 2-3 feet.....
NOS RED Control Tech Canti Brakes-$160us @@@sold@@@
I mounted these on a frame but never used them.
Comes with instructions and used Kool stop brake pads.
Red Race Face Turbine Cranks 175mm and 110 BCD-$100us shipped
Good shape but have been used.
Please PM with any questions.
More Photos' here:
http://www.flickr.com/photos/88469219@N ... 643625320/
IMG_2599 by gearlessinseattle, on Flickr
IMG_2604 by gearlessinseattle, on Flickr
IMG_2611 by gearlessinseattle, on Flickr
IMG_2615 by gearlessinseattle, on Flickr
IMG_2622 by gearlessinseattle, on Flickr
IMG_2623 by gearlessinseattle, on Flickr
IMG_2628 by gearlessinseattle, on Flickr
IMG_2638 by gearlessinseattle, on Flickr
IMG_2634 by gearlessinseattle, on Flickr
