stachaibou
Kona Fan
threaded or not is fine. preferably milled for recessed brake nut. looking not to spend heaps so scratched up and/or slightly rusty is ok, as long as it's straight. thanks if you can help- it's so hard to find such long ones!
653 or 631 racer fork, 1" x 24.8mm MINIMUM steerer tube
- Thread starter stachaibou
- Start date
sawston_vulcan
Senior Retro Guru
- Feedback
- View
You are looking for 531 forks as reynolds never made forks in 653 or 631......You could also look for Columbus SL or SLX forks.
stachaibou
Kona Fan
some people evidently did:
http://www.ebay.co.uk/itm/REYNOLDS-653- ... 1107639347
http://www.bobjacksoncycles.co.uk/produ ... kn608ilef0
thanks for advice though.
http://www.ebay.co.uk/itm/REYNOLDS-653- ... 1107639347
http://www.bobjacksoncycles.co.uk/produ ... kn608ilef0
thanks for advice though.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
sawston_vulcan
Senior Retro Guru
- Feedback
- View
653 decal is misleading....the tubeset was a mix of 753 and 531....including 531 forks....now Reynolds steel forks are chromoly....so if you bought a BJ 631 frame the main tubes are 631 but everything else is chromoly.
stachaibou
Kona Fan
thanks, i understood that the Reynolds R fork blades are chromium-molybdenum.. guess am after a 631 [or SLX] fork then.
sawston_vulcan
Senior Retro Guru
- Feedback
- View
stachaibou":3qogjp2f said:
No 631 forks either.....531 [very good] or Columbus SL or SLX.....but nothing wrong with Reynolds R forks.
Similar threads
