Iwasgoodonce
Old School Grand Master
Again I need a bit of help. I have taken apart plenty of Shimano hubs but never a Campagnolo. Apart from the cones being 1mm smaller, are there any major differences?
I have looked at the bearings on the non-drive side and they are a little dry. The cassette is off so I presume the bearings and associated surface will be accessible if I remover the axle?
No horror designs waiting for me?
Thanks.
I have looked at the bearings on the non-drive side and they are a little dry. The cassette is off so I presume the bearings and associated surface will be accessible if I remover the axle?
No horror designs waiting for me?
Thanks.