jez-4-bikes-max
Kona Fan
- Feedback
- View
Im sure you can get spares from somewhere but Ive heard the microwave trick loosens the elastomers up and Ive also read that drilling holes into the rubbers gives them better action too.
FS: Proflex 854 complete bike
- Thread starter jez-4-bikes-max
- Start date
jez-4-bikes-max
Kona Fan
- Feedback
- View
Wow - cool. How much for some replacements - need front and back.
Does it come in that green or is there another random colour?
Does it come in that green or is there another random colour?
SLIM
BoTM Winner
does come in other colours but this green is the closest in SHORE hardness to the originals , the originals were 70 , these are 80
there are other COLOURS available , but are too hard , and will cost you £45 for the length , bit expensive for colour coding
the only difference is in the materials used , these are UV resistant
which was the main cause of the originals deteriorating
jez , if you undo the large silver cap at the top of the rear stack , you will find that the elastomer is actually two pieces , seperated by the black spacer , a bit like the spacers in a manitou fork , helps with the travel
the microwave trick will work but they will soon go rock hard again in a day or two
have sent you a pm
there are other COLOURS available , but are too hard , and will cost you £45 for the length , bit expensive for colour coding
the only difference is in the materials used , these are UV resistant
which was the main cause of the originals deteriorating
jez , if you undo the large silver cap at the top of the rear stack , you will find that the elastomer is actually two pieces , seperated by the black spacer , a bit like the spacers in a manitou fork , helps with the travel
the microwave trick will work but they will soon go rock hard again in a day or two
have sent you a pm
jez-4-bikes-max
Kona Fan
- Feedback
- View
Aha so they do...
Great!
Great!
Similar threads
