Surly Moonlander

i hate the rust build up on fork steerers - would it be worth wrapping some electrical insulating tape round it?
the rust on mine ended one of the cartridge bearings in my headset and it costs more to replace the bearing than it does the bleeding headset assembly! :roll:

i like wide bars too though - but wooded trails can be a bit hairy! :p

i always enjoy dipping back into this thread :) good stuff Saltyman!
 
Strange....pics on my mobile are not the same as on iPad!

Anyways.....I'm glad the headset done its job and stopped the rust going down the steerer!

Bearings and everything are spot on, cleaned and all protected with copper grease now.

I think the issue has been the metal steerer spacers, they have let water in and were caked in crap....all sorted now but will keep an eye on it.

Not sure if tape would help but a thin layer may make it a snug fit and keep more out.
 
Why not put a thin bead of silicone mastic between each spacer? And possibly change your spacers for deeper ones and reduce the total numbe of spacers.
 
im going to have to swap them or something. they shouldnt allow water in like that....and its not like it lives on the beach.
 
first impressions are good.....comfortable and bumps are soaked up, control is fantastic, though no proper offroad test for awhile yet....

8C7F20F0-1141-4790-83EA-0FDDD7E6D981-5328-000003B66BC618C5.jpg


1F5D45FD-4CD5-4FDE-9E51-DAB35B129E21-5328-000003B663653839.jpg
 
After ripping off my new mud shovel rear fender in Scotland a couple of weeks back (bracket snapped at seat post)....I wanted to put the old one to good use before my replacement got here.

I had been using a small front mudguard on my seat tube, with good effect, but wanted something slightly larger to protect my legs and bottles from the rear tire.

537BC4ED-4955-4BDA-9E7D-F5C05ECF2473-6884-0000054FF9C82FD5.jpg


So I cut a few inches off the rear guard

7FA095C8-BC91-40FD-AA24-43122662ABA0-6884-0000054FEA8F5BA5.jpg


Bodged a few holes for zip ties.

6A622300-5A73-4FFB-AAAE-21FF01D405D4-6884-0000054FC17A0F1E.jpg


Whacked it on in 2 minutes

F1AB1A52-1490-4594-A207-2ED9BEAAD169-6884-0000054FD4C64EBD.jpg


Good clearance

6644360B-A4BC-4853-9D55-3F422465BC58-6884-0000054FE148E3DE.jpg


9EEBB16B-8DFA-405D-983A-A46E7F1E5276-6884-0000054FC993EBE0.jpg


A0B87524-070B-4D17-9BEE-3F5C52CE0701-6884-0000054FB5251A1A.jpg


Would keep my reputation of the cleanest person on the trails for awhile yet!
 
little 14 mile loop today....only downpoint was a double puncture 6 mile from home....lost all my stans and ended up with a temp repair with a leaky patch....rode 6 miles with 0psi in the tire....no idea how it stayed on!

32E33BE6-E020-4451-8BE2-AD0CA7248B9A-2647-00000108171C8EB8.jpg


CCC083C7-C51F-40A0-AF6E-E1EDDB81042C-2647-0000010811A7AC81.jpg


205BEDBE-25F0-4B48-B8F3-860F7ABE3C07-2647-000001081DACEE60.jpg


915F446F-69AE-4996-BD6A-02120E313F0A-2647-0000010822FAEE39.jpg


6EDAF138-69AC-4154-8971-BF1664C937F3-2647-000001082C3DC139.jpg


1576E7C9-C699-4004-AC8F-E630ABFC6A7C-2647-0000010848717CE4.jpg


D2E73514-F7FF-4F63-9443-0286EA27680A-2647-000001083A5A86E8.jpg


D77ABE14-6FA0-4664-8875-2FCD426E4697-2647-00000108545702F1.jpg
 
Fantastic pics as always, forever looking for your updates to get a fatty fix lol, just wish I had the funds to get one myself, they seem to put the fun factor back into biking.
 
:D most fun bikes i have rode, they do put the fun into every ride....such a laugh but also they have a real purpose and are now taken more serious.

waiting on new 4.8'' tires and lightweight inner tubes, getting twitchy and hoping for snow this winter :cool:
 
Back
Top