Retro 90s Parts/Accessories list updated Feb 21/2014

DeeEight

Retro Guru
Feedback
View
* Ok first the ground rules... Prices are firm as listed for each item and in US dollars, Paypal payment only, and buyer pays all shipping and since I'm in canada, bulkier things will cost a lot more shipping to the UK/Europe. If anyone wants to put up with regular mail shipping, then its paypal gift only as I won't be able to track it or likely insure it properly, and thus not able to meet the obligations needed to satisfy the paypal buyer/seller protection *

Also, PMs I check fairly quickly... followup messages on the thread, less often. I will edit/mark stuff that sells, as sold though once they do sell and I have received payment for them. I don't hold items as a rule though, so if its still listed for sale, it actually is still available. I will also in the future be adding additions to the list from the top, and not from the bottom, to save on scrolling thru pics to get to see what might be newly updated. Also I will list any Forks/Frames/Tires/Wheels and similar large pieces in a seperate ad.

I've started purging older listed items from here also as I move the sales to ebay whilst I still have some sneak peaks for people here to grab before they get to the bay (also I'm near maxed out my monthly listing amount limit currently).

Sakae Powerbulge Titanium bar $20USD - SOLD
Onza Buzzsaw 34T chainring $15 - SOLD
Syncros Titanium Probar $50 - SOLD
Dean Aluminium seatpost $25USD - SOLD
Syncros-clone Titanium seatpost $75 - SOLD
Cook Bros Racing Road Crankarm $50 - SOLD
Scott Unishock Fork $25 - SOLD
Coda 900M Brake levers $30 - SOLD
Deore XT U-II Brake $20 - SOLD

Ringle Cam Twist skewers $10 for the two of them - SOLD
Tioga CrMo Seatpost $15 - SOLD
Onza Pro Seatpost $15 - SOLD
Salsa Chromoly quill stem, $25 - SOLD
ControlTech (w/ syncros decals) quill stem, $15 - SOLD
Syncros Cattleprod quill stem, $20 - SOLD
Syncros Cattleprod (w/ Titanium wedge bolt) quill stem, $30 - SOLD

Syncros Cattleprod (w/ Ti wedge bolt & Magnesium wedge) quill stem, $35 - SOLD
GT FlipFlop quill stem, $15 - SOLD
Girvin Flexstem Yellow, $20 - SOLD
Girvin Flexstem Black, $15 - SOLD
NOS Syncros threadless Hinge stem, $45USD - SOLD
NOS IconUSA (pre-trek) threadless stem, $20USD - SOLD
ControlTech yellow threadless stem, $15USD - SOLD
NOS Answer A-TAC threadless stem, $40 - SOLD
Titan ACOR Titanium, 5 x 110 x 25.4, 198 grams, $75 - SOLD
NOS Answer A-Tac, 25 x 110 x 25.4, 321 grams, $50 - SOLD
Syncros Cattleprod (w/ Zircral wedge bolt), 15 x 130 x 22.2, 234 grams, $35 - SOLD
- Gripshift X-Ray, non-functional for parts only, free with any other purchase - SOLD
- Deore XT-II thumbshifters, $20 - SOLD
- Odyssey Titanium Seatpost QR, Turquoise annodized, 33 grams, $15 - SOLD
- Odyssey CrMo Seatpost & Wheel QR set, Black annodized, 38 grams seatpost / 104 grams wheels, $30/set - SOLD

NOS Specialized Titanium threadless stem, $45 - SOLD
XTR M950 Shifter/Brake levers $75 - SOLD
ODI Mushroom Attack grips $15/pair - SOLD
Curve Cantilever Brakeset $30 - SOLD
Avid Tri-Dangle cable yokes $15 each - SOLD
Topline MTN Cranks $125- SOLD
Kooka Racha Brake Levers $110 - SOLD
Kooka Racha Brake lever (single) $50 - SOLD
Kooka Racha Hydraulic lever for Magura Brakes(leaky piston seal) $25 - SOLD
Joe Murray Combo Cages, $25 - SOLD
Brodie Black Bar Ends, $20 - SOLD
Fat Bottom Titanium Stem $75 - SOLD
Shimano Deore LX front hub $10 - SOLD
Specialized M2 MMC Aheadset Stem, 0 degree rise $10 - SOLD
Brodie Bar Ends $20/pair, 1 pair each black and silver - SOLD
Brodie U-Brake Booster plate, purple anno $25 - SOLD
Axiom STI Shifter mount adapters $15/pair - SOLD
Brodie Magnesium stem wedge $15 - SOLD
Syncros Z-Bolt set $25 - SOLD



Moved the seperate Ti bolt hardware items into here. All these bolts are russian made, at one of the factories in their space city complex, using aerospace grade titanium alloy (I believe its 5Al/2Mn, which falls between US grades Ti 3Al/2.5V and 6Al/4V for strength). I've been using the parts for years, and other than one seatpost bolt I broke from over-tightening, have never had any problem with them.

Notes for some of the parts... The XTR / Dura Ace cage bolt refers to the bolt used to attach the derailleur cage to the derailleur body, located after unbolting the upper pulley and swinging the inner cage out of the way. The hanger bolts (3 grooves in photos) fits just about every shimano MTB derailleur except the 1994 Deore XT and most every road model also up through the mid 90s until shimano went to their hollow steel hanger bolts (which were as light as titanium ones). The 103mm BB spindles are compatible with the 8 speed DuraAce cranks.

- Derailleur Hanger bolts, fits almost every shimano rear derailleur except the 1994 Deore XT and the recent shadow models, 10 grams each, $10 each
- Derailleur Cage bolts, fits the 8 speed Dura Ace, Ultegra 600 and XTR derailleur cages and may fit some later 9 speed versions also, 7 grams, $10 each
- Seatpost bolt end caps, works with standard M6 x 1.0 pitch bolts, won't round out/strip like the aluminium end caps that come stock with many such bolts, 6 grams and $5/pair
- Dual-Pivot Brake Mounting Bolt set, 1 long and 1 short for front/rear set of Shimano dual-pivot road brakes, 16 grams and $20 per pair
- Quill stem bolts, 30 grams each, 157mm total length, standard M8 threading x 55mm of threads, $25 and only ONE remaining
- Cantilever pad Eyebolt & nut set, 23 grams for 4, $15 for 4 - SOLD OUT
- Crank Bolt set, 14mm hex head with washers, 17 grams, $20 for a set and I have only four sets remaining.
- Axles, compatible with shimano/suntour hubs, 9 x 108 (front hubs) @ 15 grams (about a dozen remaining), 10 x 141 (130mm spaced rear hubs) @ 29 grams (only 3 remaining), $25 each
- Brake lever barrel adjuster set, compatible with 1991 or earlier Deore/Deore XT SLR levers (NOT the later servowave levers) and some suntour/dia-compe and tektro levers, 12 grams, $15 per pair
- Seatpost Bolts, 12 grams for MTB model and 6 grams for road model, $20 each
cup sets are 39 grams, axles are 103mm @ 77 grams / 107mm @ 79 grams / 127mm @ 96 grams, $60 per set with cups, or $30 for just an axle. Note : I have only ONE set of cup&lockrings left.
- JIS Square-Taper Ti axles, compatible with all BB cups that use type 6903 cartridge bearings (Same as Syncros and a host of others), I only have a single 103mm @ 77 grams axle, four 107mm @ 79 grams axles and six 127mm @ 96 grams axles remaining, $40 per axle. I have no other axle lengths. I have a single set of cups& lockrings left for $30 which are compatible with these spindles and 6903 bearings (not included) or other brands of 17mm bearing face axles.

ticollarbolts1.jpg

ticollarbolts2.jpg

ticaliperbolts1.jpg

ticaliperbolts2.jpg

tihangerbolts1.jpg

tihangerbolts2.jpg

ticrankbolts.jpg

tistembolts.jpg

tiaxles.jpg

tibarreladj.jpg

tipostbolts.jpg

tibottoms1.jpg

tibottoms2.jpg



Additional Syncros Quill Stems
- Black 120mm x 3 degree x 25.4 quill, zircral bolt/solid wedge, $35
- Silver 140mm x 0 degree x 25.4 quill, zircral bolt/extruded wedge, $45

moresyncrosstems1.jpg

moresyncrosstems2.jpg





Suntour XC Comp Rear derailleur $35
- Excellent condition
- titanium pulleys with cartridge bearings
- 272 grams
- middle-cage length

xccomprd1.JPG

xccomprd2.JPG

xccomprd3.JPG



Deore LX Crankset $40
- 1994 model
- Low Profile arms, compatible with a 113 to 118mm JIS Square BB spindle
- 22/32/44 chainrings
- 690 grams complete with included crank bolts

nakapart1.JPG

nakapart2.JPG

nakapart3.JPG



Deore XT Front Derailleur $20
- 1994 model
- Hyperdrive Compact compatible
- 22T total capacity
- 136 grams
- excellent condition

Deore XT Rear Derailleur $40
- 1994 model
- 32T max cog, 38T total capacity
- 249 grams
- excellent condition

nakapart4.JPG

nakapart5.JPG

nakapart6.JPG



Sugino Impel Crankset $40
- Good condition
- 170mm melt-forged arms
- 58/94 bolt pattern
- 20/32/44T sugino chainrings
- 685 grams

impel170a.jpg

impel170b.jpg



Wheels Mfrg Suspension Locknuts $10
- Good condition
- Fits standard 9mm x 1.0 thread front axles (as used by Shimano, Suntour, others)
- Oversized locknuts provide better support of the axle against the dropouts

susnuts1.jpg

susnuts2.jpg



SRAM SRT-500R-81 grip shifters $15
- good condition
- includes fair condition ATI Tomac rubber grips
- 24 speeds
- 132 grams for shifters, 176 grams including grips

srt800r1.jpg

srt800r2.jpg

srt800r3.jpg



Fasta Pedals $20
- Blue annodized alloy cages, forged alloy body
- heat-treated CrMo spindle
- sealed bearings
- 270 grams/pair

fasta1.jpg

fasta2.jpg

fasta3.jpg



Gorilla Headlock Locknut $15
- NOS
- For 1 1/4" threaded steerer tubes, can be used to tighten down a 1 1/4 threadless headset on a threaded steerer tube

gorilla1.jpg

gorilla2.jpg



Various Bar Ends
- Profile : Good condition, powdercoat yellow alloy, 134 grams $10 - SOLD
- Axiom : NOS, Turquoise blue anodized alloy, 153 grams $10
- Control Tech TeamStix : Very good condition, turquoise blue anodized alloy, 144 grams, $30
- ROnza Titanium : Russian made titanium versions of the Onza CWA design, NOS, polished titanium w/ti bolts, 144 grams, $70
- Axiom TeamTitanium : NOS, Canadian made titanium, satin finish, 152 grams, $95
- Craig Metalcraft Baracudas : Good condition, Red anodized alloy, 133 grams, $30
- Radical Billygoat : Very Good condition, orange powdercoat alloy, 159 grams, $20

barends1.jpg

barends2.jpg

barends3.jpg



Club Roost IDB150 Flat Bar $20
- Nearly New condition, less than 10 hours of usage
- triple-butted 2014-T6 aluminium, bar end compatible
- 580mm width x 5 degree bend
- 166 grams

clubblue1.jpg

clubblue2.jpg

clubblue3.jpg



Various Saddles
- Avocet O2 Air 40R Men's Racing, Ti 6/4 rails, leather cover in fair condition, 210 grams $40
- Avocet O2 Air 40W Women's Racing, Ti 6/4 Rails, leather cover in good condition, 264 grams $60
- SellaItalia Flyte Titanium, Titanium rails, perforated leather cover is in fair shape, needs reglueing every season (I've used tubular rim glue in the past), 216 grams $25 - SOLD
- Serfas APC, Titanium rails, blue leather cover in good condition, kevlar edges, dual-density gel inserts, 332 grams $40 - SOLD

- Carrerra, unsure of manufacturer but made in Italy, white leather cover in good condition but chromed steel rails show some surface rust, 408 grams $20

saddles1.jpg

saddles2.jpg

saddles3.jpg

saddles4.jpg

saddles5.jpg



Turban Low-Profile cranks $100
- russian made copies of Raceface Turbine LPs
- 74/110 5-bolt
- CNC'ed from aerospace grade aluminium billet, hard annodized finish
- excellent condition
- compatible with 107-113mm spindle
- includes extra long inner chainring bolts and spacers
- 470 grams as pictured

turban1.jpg

turban2.jpg

turban3.jpg



Shimano Exage Motion wishbone shifters $10/pair
- NOS but missing mounting bolts
- 3 x 6 speed SIS/friction
- 172 grams as pictured

Shimano 200GS Rear thumb shifter $5
- NOS but missing mounting bolt
- 6 speed SIS/Friction
- 72 grams as pictured

exage1.jpg

exage2.jpg



Shimano Unishift Thumb Shifters $10 each
- Rear shifters only
- NOS Condition
- 73 grams without cable

unishift1.jpg

unishift2.jpg



Various Rockrings... All Rings are $25 each, installs beside big ring, does not include longer chainring bolts, no spacers needed.

Black Girvin 110mm bolt pattern
- New Old Stock
- covers up to 46T chainring
- 123 grams

Black Crystal Design 110mm bolt pattern
- New Old Stock
- covers up to a 48T chainring
- 206 grams

Blue or Purple Girvin 94mm bolt pattern
- Very Good condition
- Covers up to a 44T chainring
- 113 grams

Red or Silver Girvin 94mm 4-bolt pattern (for Ritchey/Sugino)
- Very Good condition
- Covers up to a 44T chainring
- 89 grams

rockrings1.jpg

rockrings2.jpg



Various Quill Stems.... I won't try and describe which good/fair/used other than the ones that are NOS, pictures should make that self evident, and even the NOS ones may have scuff marks from all being kept in the same drawer together. All have 25.4 bar clamps, and sizes will be listed as 'rise (in degrees) x extension (in mm) x quill diameter (in mm)'.

Fat Bottom Titanium, 10 x 130 x 25.4, 179 grams, $75
NOS Icon Graphite, 15 x 110 x 22.2, 238 grams, $20
NOS Icon Graphite, 0 x 120 x 22.2, 243 grams, $20
ControlTech, 5 x 145 x 28.6, 271 grams, $15
Syncros Cattleprod (w/ Zircral wedge bolt), 3 x 140 x 22.2, 237 grams, $50 - SOLD
NOS Syncros Matter Cattleprod (w/Zircral bolt), 0 x 140 x 22.2, 237 grams, $60 - SOLD

NOS Syncros Polished Cattleprod (w/Zircral bolt and hollowed wedge), 0 x 140 x 25.4, 222 grams, $60
Kalloy Uno, 10 x 150 x 22.2, 249 grams, $20
Ritchey Force w/hanger, 10 x 150 x 22.2, 377 grams, $10
Ritchey Force without hanger, 10 x 150 x 25.4, 363 grams, $5
Mongoose Iboc, 10 x 120 x 22.2, 404 grams, $5
Rocky Mountain CrMo, 10 x 130 x 25.4, 390 grams, $5
NOS JD Components Suspension Stem, 0 to 40 x 150 x 22.2/25.4, 565 grams, $15
NOS Girvin Flexstem Black, 15 x 145 x 25.4, 507 grams, $15
NOS Girvin Flexstem Black, 15 x 130 x 25.4, 520 grams, $15

quillstems1.jpg

quillstems2.jpg

quillstems3.jpg



Various Aheadset stems.... (all very good condition or better unless listed as NOS and all are 25.4 bar clamps)

Kooka Rasta, $150 - SOLD
Kooka Bronze, $100 - SOLD

Kore Elite Red Powdercoat, 1 1/8 steerer x 150mm x 0 degree, 194 grams... $20
Kore Elite Hinge Red Annodized, 1 1/8 steerer x 120mm x 10 degree, 200 grams... $45
NOS Syncros Cattlehead Hinge, 1 1/8 steerer x 130mm x 0 degree, 230 grams... $55
Barracuda Chromoly, 1 1/8 steerer x 90mm x 10 degree, 176 grams... $5
NOS Axiom Blue, 1 1/8 steerer x 130mm x 5 degree, 172 grams... $10
ControlTech black, 1" steerer x 135mm x 0 degree, 173 grams... $15
NOS Specialzed M2 Metal matrix stems, 1 1/8 steerer x 135mm and 167 grams, 0 degree is SOLD and +10 degree is still available... $10
NOS Radical Orange stems, both 1 1/8 steerer x 6 degree, one is 135mm & 208 grams and the other is 120mm & 192 grams, $10 each

aheadstems11.jpg

aheadstems22.jpg

aheadstems33.jpg



Breeze & Angell Hite-Rites $20 each
- NOS, still in packaging
- Extra Height models
- Available in black or chromed
- compatible with included hardware with up to 27.2 diameter seatposts, larger posts require fashioning a different clamp band for the post

Shimano Sharkfin chainstay protectors $9 US each
- NOS, still in packaging
- Labeled shimano only, not Deore XT as some were

Cool Tool Seatpost QR tools $15 US each
- NOS
- Seatpost QR with tools
- 14/15 ga spoke wrenches, 10mm box socket wrench, 4-5-6mm allen wrenches
- 71 grams

coolfinrite1.jpg

coolfinrite2.jpg



Shimano HG91 Chains - $35 each

- Brand New Old Stock
- Some are OEM packaged, some are aftermarket boxed
- Compatible with 7 and 8 speed drivetrains
- These were the Deore XT / Ultegra 600 level chains
- 116L lengths

hg91boxed.jpg



Shifters
- Exage Country SLR brake levers/21 speed SIS thumbshifters, NOS condition, does not include brake lever cable adjuster barrels, 440 grams, $10
- Suntour XC-Pro/Comp X-Press command shifters, 21 speed, rear shifter is fine, front shifter behaves wonky, 306 grams with cables, $5

exagecountry1.jpg

exagecountry2.jpg

xpressshifters.jpg



Scott-Pedersen Self-Energizing Cantilever brake $10
- good condition, fully functional
- includes mounting bolts
- good companion brake to a U-brake or powercam brake
- 186 grams as pictured

scottped1.jpg

scottped2.jpg



Annodized Alloy cable yokes $5/pair
- NOS still in packaging
- Available in blue, red or gold annodizing
- 21 grams / pair

alloyyokes.jpg



Odyssey Straddle Rod $15
- Used but very good condition
- Includes the small eyelet sleeve for the bolt end rod (not pictured)
- 34 grams

straddlerod1.jpg

straddlerod2.jpg



DiaCompe MX-99 Brake Levers $15
- Good condition except for finger rubbing of finish on lever blades
- Cantilever/U-Brake compatible and possibly some V-brakes but I make no guarantee that'll include yours ;)
- 149 grams/pair

mx99levers1.jpg

mx99levers2.jpg



Action Tec Titanium 56T chainring, $100
- Excellent condition, maybe used it for a couple hundred kms of road riding
- 110mm BCD
- laser-cut from Heat-treated USA made Ti 6Al/4V
- 112 grams

onzati1.jpg

onzati2.jpg



Avid Microadapter $30 - SOLD


Mtn Tamer triple $25
- Excellent condition
- adapts 74mm inner bolt pattern cranks to take thread-on FW cogs (believe they used Regina cogs)
- includes a 19T cog
- purple annodized adapter
- 81 grams

tameravid1.jpg

tameravid2.jpg



White Industries Titanium bottom bracket $75
- First generation model
- NOS but is missing one of the lock collars for the spindle
- includes chainline adjusting spacer washers and crank bolts
- can fit either 68 or 73mm shells
- 133mm ISO taper spindle, most likely was intended for a Campy Record OR or some model of stronglight crankset

whitetibb.jpg

whitetibb2.jpg



Deore XT M730 Crankarms $40
- Good condition except for scratches/gouge marks on the sides of the arms (see pictures)
- tapers and pedal threads are excellent
- 175mm arms, 74/110 bolt pattern
- 526 grams/pair
- does not include any bolts, spacers or rings

xtcrank1.jpg

xtcrank2.jpg

xtcrank3.jpg

xtcrank4.jpg



Deore XT M739 V-brake $25
- Very good condition, no noticeable play in the pivots last time I used them
- includes mounting bolts, pads, and noodle
- 205 grams including hardware

xtvbrake1.jpg

xtvbrake2.jpg



Brodie and Odyssey alloy boosters $10 each
- Used but good condition
- does not include any hardware
- Brodie booster is 67 grams
- Odyssey U4 booster is 80 grams and is compatible with canti/v mounted outboard like other boosters or with U-brakes mounting inboard of the brake arms

silverboost1.jpg

silverboost2.jpg
 
I am starting to get some quotes for the ridiculousness of overseas shipping... the seatposts are coming out as $36 for surface mail, and $62 for Xpresspos for one post around half a kilo box weight. Its the box dimensions that are the problem more than the mass. Two seatposts together is only about $4 more for surface, and $12 more for xpresspost.
 
Two hite-rites... 16 cm x 10cm x 9cm box, 0.37kg...to the UK...

Surface mail...six weeks... $10
Air Mail...2-3 weeks...$17
Xpresspost International...4 business days...$61
 
Back
Top