Pinerello Bb thread

Deleted member 24574 · Sep 29, 2012

I have now totally stripped the frame.

Just the drive side Bb plate remains which seems stuck fast.

For the avoidance of doubt this is a right hand thread?

Also, any tips for extraction?

foz · Sep 29, 2012

if it's pinarello it's italian thread, so not reversed. anti-clockwise to unscrew it. if it's stuck fast and you can't get it out with a vice, then if it's only the cup you can probably cut it out (carefully, avoiding damage to the BB shell threads)

jCymbal · Sep 29, 2012

what foz said.

Midlife · Sep 29, 2012

As above........if you are using a vice then it has to be in good condition, rounding of the jaws causes the fixed cup to jump out

Your local bike shop should have a BB tool like a large T-bar which clamps onto the fixed cup which is used by hand or in a vice or with a breaker bar ..

http://brianphillips.co.nz/zen/images/c7701.jpg

http://www.bikeforums.net/showthread.ph ... up-Removal

post 14 ....

Shaun

Pinerello Bb thread

Deleted member 24574

foz

jCymbal

Retro Guru

Midlife

Retro Wizard

Similar threads

Latest posts