Updated - XTR M960 crankset / levers only now needed

SPR

Dirt Disciple
Must be excellent condition and matching and not silver :)

Also consider front / rear mechs



Thanks

Simon
 
I have a nos boxed M953 rear mech if that's any use? Rapid rise

And also a matching 953 front mech in outstanding condition. It's 34.9 clamp (can supply a 31.8 shim) bottom pull bottom swing.
 
GT-Steve":lvb975rx said:
I have a nos boxed M953 rear mech if that's any use? Rapid rise

And also a matching 953 front mech in outstanding condition. It's 34.9 clamp (can supply a 31.8 shim) bottom pull bottom swing.

Thanks for the offer - The Klein is a 34.9 so I'd presume the mech fits

They are Black / gunmetal ?

How much for both
 
Yes, if you Klein pulls the FD from under the bottombracket, it'll be perfect.

Yes both gunmetal, and here's a quick pic I just took of them both.

C2CAD671-E339-47A8-8179-0AFF7C018AE7-5170-00000B152280C064.jpg


would say £100 posted UK for the pair, insured and trackable.
 
GT-Steve":3nema2yo said:
no problemo.

I have some matching cranks too, but they do have a bit of heel rub... :oops:

Is the finish much different from the 960"s ? as I've won 960 brakes
 
SPR":3llqxdqh said:
GT-Steve":3llqxdqh said:
no problemo.

I have some matching cranks too, but they do have a bit of heel rub... :oops:

Is the finish much different from the 960"s ? as I've won 960 brakes

I think the gunmetal is ever so slightly a different shade (960 being a bit darker) and the bigger difference is that m953 is matt finish and 960 is shiny.
 
Ok so I've got 960's in

Brakes
Rear mech
front mech

So have you in your cupboard a 960 crank set ? :cool:
 
Back
Top