Fork question on GIANT CADEX CFM-3

concordino · Aug 28, 2012

MD1,

A 1' (25.4) steerer fork will take a 22.2 stem also known as 1" stem.
A 1 1/8 Steerer fork will take a 25.4 stem also known as a 1 1/8 stem.

Hope this helps

In your case, your stem has a shim installed to compensate for the size.
A 22.2 stem + shim = 25.4 to fit into your 1 1/8 fork.

MD1 · Aug 28, 2012

concordino":12lvdpe8 said:
MD1,

A 1' (25.4) steerer fork will take a 22.2 stem also known as 1" stem.
A 1 1/8 Steerer fork will take a 25.4 stem also known as a 1 1/8 stem.

Hope this helps

In your case, your stem has a shim installed to compensate for the size.
A 22.2 stem + shim = 25.4 to fit into your 1 1/8 fork.

Thank you very much
You have cleared up my confusion regarding fork steerers and stems.

I thought that was the case too.. but the shim doesn't go into the fork steerer it sits on top of it inside the top half of the headset.
I bought a 25.4mm quill for it but it wouldn't fit.
I have now bought a 22.2mm quill and it fits perfectly into the steerer, but here is a slight gap at the top of the headset where the shim was on the last quill.

Fork question on GIANT CADEX CFM-3

concordino

Retro Guru

MD1

Dirt Disciple

Similar threads

Latest posts