1996 Kona Koa

Giro9

Dirt Disciple
Firstly, this is my first post so please be gentle!

I saw a thread here and realised that it was the auction that I had won. Maybe you'd be interested in the story of my 1996 Kona Koa?

Firstly a bit of history. This is the third Kona that I've owned. My first proper mountain bike in 1994 was a Kona Hahanna in that lovely metallic blue. Then in 1997 I upgraded to a 1998 Kona Kilauea. BTW, if anyone has a 1994 Hahanna that they'd like shot of let me know.

So the pictures on eBay did not lie. This really was a pile of bike bits, but for the money paid I really couldn't complain!
 

Attachments

  • 429037_10150712910190546_661406452_n.jpg
    429037_10150712910190546_661406452_n.jpg
    29.6 KB · Views: 2,237
  • 430439_10150712909950546_1792829863_n.jpg
    430439_10150712909950546_1792829863_n.jpg
    39.8 KB · Views: 2,236
  • 426350_10150712909515546_1881612773_n.jpg
    426350_10150712909515546_1881612773_n.jpg
    25.4 KB · Views: 2,233
  • 426151_10150712909360546_2056737999_n.jpg
    426151_10150712909360546_2056737999_n.jpg
    39.3 KB · Views: 2,237
The work starts

So I should have originally mentioned that the whole purpose of this purchase was to build what I sold the wife as a 'village bike'. You'd probably be more familiar with the term pub bike. Something to take to the shop and not need to lock up.

So I picked the bike up and got it back home. On a first quick inspection I actually had almost everything that I needed. The following were missing:
* Shifters
* Tyres
* Inners
* Grips
* Cables

The following needed replacement:
* Saddle
* Pedals

So I stripped down the bike totally - except the bottom bracket and headset - and gave everything a clean. A good clean to get rid of all that rust etc.

That got me to the stage shown in the following pictures.
 

Attachments

  • 425641_10150712921680546_1757409880_n.jpg
    425641_10150712921680546_1757409880_n.jpg
    127.3 KB · Views: 2,223
  • 467688_10150712921270546_2005118263_o.jpg
    467688_10150712921270546_2005118263_o.jpg
    345.8 KB · Views: 2,223
Buying bits

Now I had been toying with the idea of making this a single-speed project bike. But riding around a bit without shifters and cables made me realise that I needed some gears. So I decided on losing the front mech and running the middle chainring with the existing 7-speed cassette.

So cost minimisation was the name of the game with replacement parts. I picked up a 7-speed Sunrace rear shifter new on eBay for less than £10. I'd never heard of Sunrace before. It seems that they bought the IP of Sturmey-Archer and moved manufacturing to the fast east. I wasn't expecting much, but I was impressed that the shifter installed and worked straight away.

Fortunately the stock Kona brake levers still worked smoothly. So they just needed new inners and outers.

So now I had a working bike with 7 speed.
 

Attachments

  • 414505_10150752647345546_894353358_o.jpg
    414505_10150752647345546_894353358_o.jpg
    363 KB · Views: 2,203
The bits that are hard to reach

After riding around with the bike in this state for 6 months I got the urge to fettle some more.

I always knew that the headset and bottom bracket needed attention. But I don't have the tools or expertise to remove them. So I outsourced the work.

The bottom bracket was replaced (upgraded) with a Shimano UN55 unit. The old unit had rusted into the frame and was, apparently, problematic to remove. Threads needing rechasing etc. Of course, now there is no play and the action is smooth as ever.

The headset was more problematic because of the low stack height. In the end I decided to just have it cleaned and the bearing replaced. The races are slightly pitted and could do with replacing. But I wanted to keep the Kona headset.

While the chainset was off for the BB replacement I had the granny ring removed. I then removed the outer ring myself. I found that I needed to pack out the installed stock Shimano STX chainring bolts with 2mm washers.

I'm amazed what a difference removing the chainrings has made. The bike 'looks' really different now.
 

Attachments

  • 326497_10151157365670546_309101329_o.jpg
    326497_10151157365670546_309101329_o.jpg
    268 KB · Views: 2,204
The future

So that brings you upto date. Well almost. I have a new cassette and chain on order. Both lovely and silver/satin. So that will really smarten things up.

I'm also planning to put a pair of Continental City Contacts (Reflex) on it to speed me through the streets. Since let's face it, this bike is never going off road.

What next? Does anyone have any thoughts?

Two things come to mind:
1. Hubs. Need to be stripped and checked.
2. Paint. Whilst a total respray would be nice it's out of budget. So I might have to resort to spot fixing.
 
Looking good! I agree with Travill that it needs to be locked up. It really doesn't look as though it would benefit from repainting - I think you'll be pleasantly surprised by how effective a bit of minor paint repair will be. The only downside being, you'll then need a bigger lock.

Puzzled that you say it won't see any off-road?
 
So much satisfaction indeed!

It's unlikely to see off-road use because I have a stock '98 Kilauea in the garage with it!

What's this worth? I'm getting the feeling that what I paid on eBay was an absolute bargain!

On the lookout now for my '94 Hahanna...
 
I owned one of them from new, 1996 through to about 2001. Nice bike! I upgraded mine straight from the box, to LX spec with my favorite Control Tech stuff, Flite, Smoke n Dart etc, it was a wicked little bike for not much bucks. The paint job was one of the things I liked best about it, it glows beautifully if you give it a wipe down with GT85. You've done a lovely resto there - good to see one as there are so few around these days. :cool:
 
Back
Top