Yeti FRO -> C-26 Prototype replica tribute project
- Thread starter mkozaczek
- Start date
Silverfish
Senior Retro Guru
- Feedback
- View
I'd be very suprised if there were anymore tubesets left...
bmx4130crmo
Retro Guru
mkozaczek":33ja6zj7 said:
22.225mm are 7/8" for the correctness
Hi Martin, now I found your C-26 Thread. I'm the man with the tires you wanted
Cheers,
Michael
Bullseye bb problemsolvers:
I made my own conversion of a 22mm euro bmx quatro bearing BB.
http://www.ebay.com/itm/Bmx-sealed-22mm ... 500wt_1180
New Bullseye BB
http://www.bullseyecycleusa.com/contact
http://desperadocycles.com/Dura-Ace_Bul ... Shims.html
I made my own conversion of a 22mm euro bmx quatro bearing BB.
http://www.ebay.com/itm/Bmx-sealed-22mm ... 500wt_1180
New Bullseye BB
http://www.bullseyecycleusa.com/contact
http://desperadocycles.com/Dura-Ace_Bul ... Shims.html
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
bmx4130crmo
Retro Guru
yeti-man":392q3eu1 said:
How get you out the .225 of the bearing inner ring? The idea isn't new, but I don't know how can I do it. My man at the lathe said, he don't can clamp in it and the bearing material is harder than the chisel. :cry:
yeti-man":2ft9pglj said:
So cool !
But do these cups fit on classic MTB BB thread ?
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
bmx4130crmo":30eotksp said:
You have to handsand the Bullseye crank axel down to 22mm bit by bit till they fit the bb bearing. It took me 1-2 hours of sanding. Then you can choose any kind of euro BMX bottom brackets
24pouces":30eotksp said:
Euro BB's are ISO threaded and made for 63mm BB houses. The cool bb I got have two bearings on each side makin a better BB than the original and many BB today.
So that bottom bracket is not in production.
But you can get just the outboard cups that will fit a Bullseye crank. They can be had in black and so do not stand out that much, but they are not correct if you are trying to stick with an all vintage build.
I can't find a photo but they look just like the ones in the photo above.
But you can get just the outboard cups that will fit a Bullseye crank. They can be had in black and so do not stand out that much, but they are not correct if you are trying to stick with an all vintage build.
I can't find a photo but they look just like the ones in the photo above.
Similar threads
