A new beginning (P5): 1995 Kona Humuhumu-Nukunuku-A-Pua'a

mauiblue · Jul 29, 2012

Hi Adrian. My bike has a Shimano 7 speed internal hub with thumb shifter. As with yours, the axle is slightly wider than the 120mm rear width. I measured the opening with the hub installed and I've got 128mm. The width needed to accommodate the new 8 speed Shimano Nexus internal rear hub is 132mm. I'm concerned about the chainline and if the wider width required to install the hub would affect it.

johnnypie13 · Jul 30, 2012

awesome mate

raidan73 · Jul 30, 2012

johnnypie13":1infb21e said:
awesome mate

Thanks John, thinking of swapping the bar tape and Rolls for some brown grips and a Brooks saddle. It's a shame the rear canti bosses spoil the look a bit but I think I might regret grinding them off in the future!

Raleighracer · Jul 30, 2012

This is just awesome, bet it's dead comfy?

Can just imagine cruising along the beach, or to work, or down some canal paths. In fact I'd cruise everywhere on it!!!

- looks for cruiser bars and maxis hookworms for a simular build.......

Kona Tone · Jul 30, 2012

Wanted one of these for a while now and when I saw the first page of this thread I though mmmmm White Walls and White grips and pedals, man after my own heart, lovely job.

Tony

DM · Aug 28, 2012

I might be wrong but I think all the old Humu's had rear canti mounts so perhaps they have been removed? Mine is a '95 and still has them. They don't look great but I want to keep them in case I ever get rid of the the Nexus hub and coaster brake.

Some years (in some markets) had a coaster brake with a tab on the left chainstay; those frames didn't have any cantilever posts on the seat stays.

DM · Aug 28, 2012

raidan73":29t2984r said:
johnnypie13":29t2984r said:

awesome mate

Click to expand...

Thanks John, thinking of swapping the bar tape and Rolls for some brown grips and a Brooks saddle. It's a shame the rear canti bosses spoil the look a bit but I think I might regret grinding them off in the future!

I think the brown tape & Brooks would be awesome.
I'd leave the canti mounts, too. You could get some pimped-out blanking plugs, or make/modify some sort of "Humu-appropriate" rack:

...for beer:
http://www.charliethebikemonger.com/pdw ... 1245-p.asp

...skateboard:
http://www.winstanleysbikes.co.uk/produ ... nnier_Rack

or other stuff:
http://www.charliethebikemonger.com/pdw ... 1135-p.asp

raidan73 · Aug 28, 2012

DM":plfjsizz said:
I think the brown tape & Brooks would be awesome.
I'd leave the canti mounts, too. You kcould get some pimped-out blanking plugs, or make/modify some sort of "Humu-appropriate" rack:

...for beer:
http://www.charliethebikemonger.com/pdw ... 1245-p.asp

...skateboard:
http://www.winstanleysbikes.co.uk/produ ... nnier_Rack

or other stuff:
http://www.charliethebikemonger.com/pdw ... 1135-p.asp

Definitely won't be grinding off the canti mounts and the brown Brooks and bar tape will be coming as soon as funds allow!

Really like that last rack in your links too

sylus · Aug 28, 2012

It's not a particulary sought after Kona and the funkyness of the frame means experimentation there was never going to be a conventional build

I like the freakyness and and where it's going

raidan73 · Aug 28, 2012

DM":1esbqojz said:
Some years (in some markets) had a coaster brake with a tab on the left chainstay; those frames didn't have any cantilever posts on the seat stays.

Ok thanks for that. I'm no expert - I just trawled through all the ctalogues looking at the pictures

A new beginning (P5): 1995 Kona Humuhumu-Nukunuku-A-Pua'a

mauiblue

Dirt Disciple

johnnypie13

raidan73

Raleighracer

Retro Guru

Kona Tone

Retro Guru

DM

Senior Retro Guru

DM

Senior Retro Guru

raidan73

sylus

Old School Grand Master

raidan73

Similar threads

Latest posts