SID rebuild guide??
- Thread starter GT-Steve
- Start date
old_coyote_pedaller
MacRetro Rider
- Feedback
- View
Might find something here,
http://my-sport.spb.ru/manual_1/index-21.htm
Although not specifically 98/99 SID's there's info on 2000/2001 SID's.
There's another Russian site I had a link to but can't find it at the moment.
http://my-sport.spb.ru/manual_1/index-21.htm
Although not specifically 98/99 SID's there's info on 2000/2001 SID's.
There's another Russian site I had a link to but can't find it at the moment.
- Feedback
- View
drystonepaul probably scanned a good uide in from teh magazines and this probably has a step by step and more detail than you need guide http://mountainbikers.hubsystems.com.au ... pter38.pdf
old_coyote_pedaller
MacRetro Rider
- Feedback
- View
Found it.
http://www.birota.ru/manuals/rockshox/index.php
Obviously it's in Russian so I used Google translate to navigate my way around but found that the PDF's didn't open properly in the translated version.
Opened another tab with the original Russian which worked OK.
Fluffychicken, good find, now saved for future reference.
http://www.birota.ru/manuals/rockshox/index.php
Obviously it's in Russian so I used Google translate to navigate my way around but found that the PDF's didn't open properly in the translated version.
Opened another tab with the original Russian which worked OK.
Fluffychicken, good find, now saved for future reference.
- Feedback
- View
.
They look very similar to my 02 ones, not usre if the internals are alike or not?
I've got a PDF, if i can figure out how to get it to you i will
They look very similar to my 02 ones, not usre if the internals are alike or not?
I've got a PDF, if i can figure out how to get it to you i will
sausagefingers
Senior Retro Guru
- Feedback
- View
i'll also be interested in this,i've stripped mine down. now i just have a pile of bits
The only tip I can give for the 98 version is the fitting of new valves schrader type. No more hassle with the needle and dodgy valves.
here :
http://www.retrobike.co.uk/forum/viewto ... 0&start=15
I recently sanded and polished to look as the "original"
here :
http://www.retrobike.co.uk/forum/viewto ... 0&start=15
I recently sanded and polished to look as the "original"
