pace rc100 finally finished.

just opened some post and these were delivered today. look very nice.
and will solve the cable guide problem. and at 60p each, good value for money.
 

Attachments

  • IMG_4543.JPG
    IMG_4543.JPG
    41.8 KB · Views: 817
  • IMG_4546.JPG
    IMG_4546.JPG
    39.9 KB · Views: 817
Great thread - explaining as it does why my square Pace had to be anything other than an RC100! (I just don't have the patience)
 
i was lucky enough to get this off ebay,
didnt think it would be this nice.
very happy indeed.
looks like new.
 

Attachments

  • IMG_4555.JPG
    IMG_4555.JPG
    40.7 KB · Views: 729
  • IMG_4556.JPG
    IMG_4556.JPG
    34 KB · Views: 729
  • IMG_4557.JPG
    IMG_4557.JPG
    35.3 KB · Views: 729
videojetman":2821f8l2 said:
looks like new.

That's probably because it is new. Looks to be one of the rerelease ones:
http://www.ebay.co.uk/itm/SELLE-ITALIA- ... _662wt_689

Key differences are black steel rails rather than silver (although some originals had black, alloy rails), vinyl cover and no stripes next to the word turbo (white stripes on early, rainbow on later ones.

Best way to check is to tip it upside down and look for the date stamp!
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok, when i took the pace apart i just put all the old bolts in a tub, so can anyone tell me where they go ? are the lime coloured bolts titanium ?
still waiting for the frame to be done from argos.
also i bought an xc pro hub and recently bought a 7 speed casette, only to find out today they are not compatible, is the hub for an 8 speed casette ?
nothing is straight forward with this build.
 

Attachments

  • IMG_4558.JPG
    IMG_4558.JPG
    46.8 KB · Views: 954
  • IMG_4559.JPG
    IMG_4559.JPG
    41.6 KB · Views: 954
  • IMG_4560.JPG
    IMG_4560.JPG
    40.8 KB · Views: 954
i thought i would try the cassette on the 36 hole hub i got and it fits,
so my next question is, can the bit that the cassette attaches to, be swapped between hubs ? if it can then problem solved.
 

Attachments

  • IMG_4563.JPG
    IMG_4563.JPG
    35.9 KB · Views: 950
Buy a spacer for the 8 speed hub.

The "lime green" or pale gold as most normal sighted people call them bolts are alluminium.
 
I'd be interested in whether the free hub from an 8 speed suntour hub can be swapped on to a 7 speed hub. I've some 7 speed xc pro hubs that I may run 8 speed on, so bought an 8 speed hub to do the swap, but for the life of me can't see how to get the free hub off. I'd be happy to have a go to see if it is possible if anyone can tell me how.

I'll report back once I've done it highlighting problems, pitfalls etc.
 
Back
Top