defconfunk
GT Fan
At last, got me hands on an Intense M1
- Thread starter jimjim2012
- Start date
LeeDevelopment
Old School Grand Master
- Feedback
- View
Pist0la":ihxh8a0x said:
A teeny weeny little gap!
marky mark
Senior Retro Guru
- Feedback
- View
defconfunk
i think you frame is 1999/2000
this is based around
1/ the old style front end.
2/ the one piece linkage.
3/ and the horizontal back end, looks on the photo's like no "V" Brake mounts?
i think you frame is 1999/2000
this is based around
1/ the old style front end.
2/ the one piece linkage.
3/ and the horizontal back end, looks on the photo's like no "V" Brake mounts?
defconfunk
GT Fan
marky mark
no there are no v mounts at all and it has that big chunk of 10mm ish plate under the head tube. i'd love to know exactly what i have on my hands.
no there are no v mounts at all and it has that big chunk of 10mm ish plate under the head tube. i'd love to know exactly what i have on my hands.
marky mark
Senior Retro Guru
- Feedback
- View
i have never seen one with the 10mm chunk under the headtube...??
I have owned 3 M1's so far...
E-mail intense with the frame number and they might be able to tell you what year..??
I have owned 3 M1's so far...
E-mail intense with the frame number and they might be able to tell you what year..??
defconfunk
GT Fan
if you look closely you can see it in the pics. it runs back to just before the down tube comes out of the frame. i'll see if i have any pics of it. it might be a repair? but it looks right like it should be there. im starting to think its a repair to be honest but a good one.
defconfunk
GT Fan
it looks like some sort of reinforcement. really well welded in. I have been out to the shed and taken pics. I'm ashamed at how dusty it was 
like you said i have never seen it on any other m1 :?
like you said i have never seen it on any other m1 :?
Attachments
marky mark
Senior Retro Guru
- Feedback
- View
looks home made to me, the previous owner i am guessing opened up the bottom headset cup...
defconfunk
GT Fan
i hope its not a home made repair as it follows all the main weld lines. i doubt if anyone welded it they re-temperd the frame thus leaving the head tube ali soft as cheese :?
