will a 29.8 seatpost tighten in a 30.0 designed frame?

kingroon":11t1szim said:
bowsho":11t1szim said:
as above, what ya reckon guys?

Don't do it.. Get a 30.0 'post..

O que você faz, faça corretamente :cool:

It's perfectly possible to make a shim from a piece of 0.1mm shim stock, and to make it correctly too ;)
 
^^^^ wot he says, coke cans are 0.1 mm

I make IS caliper shims from them so no reason why you cannot make one for your seat post, it cuts easily with scissors.

(and the aluminium shutters on 3 1/2 inch floppy discs are 0.2 mm in case you were looking for thicker caliper shims) ;)
 
02gf74":12o12053 said:
^^^^ wot he says, coke cans are 0.1 mm

I make IS caliper shims from them so no reason why you cannot make one for your seat post, it cuts easily with scissors.

(and the aluminium shutters on 3 1/2 inch floppy discs are 0.2 mm in case you were looking for thicker caliper shims) ;)

great use for the old discs! :LOL: :shock: :D
 
Don't panic! Just thinking out loud really. Wanted a silver Thomson but they don't make em. Will probably get a 27.2 and shim it
 
Back
Top