700c Weinmann Concaves
- Thread starter Trek460
- Start date
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got an old 36hole front that will do the rim for you, but as ever with these things its postage that'll hurt more than the few quid I want for the rim 
I can send you the black anodised spokes too if you want. They are 302mm/304mm, hard to be precise without unbuilding 1. In good condition, certainly re-usable.
From memory 302/304's will fit most small flange hubs, ie campy, shimano, maillard, galli. There is only about 1-2mm difference in their respective sizes, ... if any at all, so the 302/304's can be used.
The downside of course is the 4mm shorter length on the drive side if you go over a 5/6speed block. It gets harder to lose the extra mm's the bigger the block. Suppose you know all this anyways
Your call buddy, PM me or post here, and we'll sort it out. Laz.
I can send you the black anodised spokes too if you want. They are 302mm/304mm, hard to be precise without unbuilding 1. In good condition, certainly re-usable.
From memory 302/304's will fit most small flange hubs, ie campy, shimano, maillard, galli. There is only about 1-2mm difference in their respective sizes, ... if any at all, so the 302/304's can be used.
The downside of course is the 4mm shorter length on the drive side if you go over a 5/6speed block. It gets harder to lose the extra mm's the bigger the block. Suppose you know all this anyways
Your call buddy, PM me or post here, and we'll sort it out. Laz.
Similar threads
