Wanted more TK and ZZ assistance

Chaps sterling work so far on helping me with the Vicious decal stuff Is there any chance I could twist your arm for some more help? TK I have the head graphic you done at work and need to add it to this set but this is what I have so far

http://www.flickr.com/photos/28886706@N ... 801540020/

what I* now need to do is size them and get them on a single sheet and colour them. And mibee touch up the Ritchey decal.


* The 'I' being you two

Yo K

I'll take a gander at the Ritchey one at some point this week...

You don't necessarily need them all on one contact sheet for Gil*, I've always just given him the individual files and dimensions required for each - he would then create the contact sheet as final verification.

* Assuming you are using Gil that is.

Here are the ones I did previously... I know you've got them already, more for TK if he feels the need to twiddle with any of them...

Stars and Stripes, much cleaner than the original one on your flickr page

metal guru

The following are 3 more 'metal gurus' but with 20, 40 and 60 pixels of stretch in the vertical so it works better wrapped on a tube (TK is the expert here and can do this properly though using Pi, and the tube diameter, and other mathematical wizardry).

http://img32.imageshack.us/img32/718/me ... tch20p.jpg
http://img804.imageshack.us/img804/7503 ... tch40p.jpg
http://img11.imageshack.us/img11/4917/m ... tch60p.jpg

Vicious Cycles with the Carl *Snarl* tagline

And a couple more of the Vicious Cycles without the Carl *Snarl* tag, one sharper, one smoother.

http://img694.imageshack.us/img694/973/ ... ssharp.jpg
http://img38.imageshack.us/img38/6011/v ... smooth.jpg

So what do you need?
Vectors of ZZ stuff on a sheet with the dog?
What where the measurements of the decals you took off?
and do you want the snarl bit made up too?

TK I need the dog head again(I forgot to email it from work :roll: ) the last metal guru and the carl one on a sheet and vectorized and they Ritchey one touched up too. And this one on the sheet as well. Oh and the flag logo.

Sizes are

dugs heed: head to snout 39mm, lug to lug 35mm

vicious logo: from the tip of the V to the s 195mm, top of the C to the bottom of the carl snarl writing 39mm

metal guru: 64mm long, height of the M is 8mm

flag logo is 40mm by 29mm

http://img814.imageshack.us/img814/4720 ... pesful.jpg

ritchey deal is 59mm long, can you scale it from the picture?

I've rolled the sizes so they should be a pretty accurate.

When do you need it by? I could probably fit it in next week at some point. Although I still have stuff to do for Lee Dev and work is picking up.

We also need to start on the Drum Ride promotion.

TK next week would be magic.