rear discs on atx 2

I'd also opt for the hope No2 caliper ,in that it fits any frame.

You can attach the caliper to the stay via a clip rather than the torsion arm you see in big.ecks pic on his worldfarce
the short axle and all the bits are available,the only thing hard to find is a thin end spacer[4mm] instead of the standard one on the hub.
I know i sold a spare one to someone here so im sure they are about if you ask :?
 
atx brake

sorry mate,i havent got any pics without the adapter on.

but if you desperately need to see 1,i could take everything off when i get chance?

it looks straight forward enough though.
 
This uses the same set up as the hope C2 No2 caliper only it gives an IS mount so you can use any make of caliper other than the C2.
 

Attachments

  • frame adaptor 001 (Large).jpg
    frame adaptor 001 (Large).jpg
    85 KB · Views: 985
  • frame adaptor 003 (Large).jpg
    frame adaptor 003 (Large).jpg
    85 KB · Views: 985
  • frame adaptor 002 (Large).jpg
    frame adaptor 002 (Large).jpg
    77 KB · Views: 985
i use the Brake Therapy Adapter which works in the same way, but it wont work on the ATX as there is a pivot between the dropout and the brake post
 
This being the Hope No2 caliper,mounted to my '99 clockwork.
And using the stay clamp,as opposed to the torsion arm to the brake pivot that you see on my torus in my previous posting [with the hope X2 fitted]

Helpful :D
 

Attachments

  • sony_md_029_medium_200_986 (Large).jpg
    sony_md_029_medium_200_986 (Large).jpg
    120.5 KB · Views: 979
  • sony_md_036_199 (Large).jpg
    sony_md_036_199 (Large).jpg
    114.6 KB · Views: 979
Back
Top