Help! educate me on these 20mm axle doo-hickeys...

midnite_drive · May 13, 2009

Ok, it goes a little something like this, im building up a play bike with mucho travel and ive just got hold of a set of Manitou stance dual crown forks but they are missing the 20mm bolt in axle.
This is all new to me so forgive me if its stupid! Cant I just get a piece of 2mm walled steel tubing with an OD of 20mm and cut it to the correct length and use that cause i cant seem to find the exact one i need online and the ones that I have found all cost ridiculous amounts of money for what is just a piece of pipe!
Cheers, J

perry · May 13, 2009

if the lowers clamp at both ends yep a bit of tube will be fine , id use alloy though

Sidewinder · May 13, 2009

As most manufacturers use steel axles Fox Marzocchi I'd stick with the steel

Radical_53 · May 13, 2009

Even a White Bros UD 150 uses an aluminium axle. I haven't come across a 20mm axle made of steel so far, definitely not with Fox, White or DT/Pace.

midnite_drive · May 13, 2009

cool, thanks guys. Was going with steel as its cheaper and dare i say it stronger? not bothered about the weight. Thought of a potential problem though, arent some of these axles stepped so there thinner where the fork clamps them?

Sidewinder · May 13, 2009

My Marz 66s are steel ,My RS pikes Maxle were steel and I'm pretty sure my Fox 36's were steel .

Kona Paul · May 13, 2009

You can order the axle from CRC for next to nothing.

midnite_drive · May 13, 2009

really? can you give me a link as I have scoured their web site and come up empty :?

Kona Paul · May 14, 2009

http://www.chainreactioncycles.com/Sear ... rough+axle

Scroll down to fork spares-axles

These are all for Marzocchi forks, but they do exist, so surely you can find one for your Manitou. Maybe on speedgoat or beyond bikes. Try contacting Answer if all else fails.

Help! educate me on these 20mm axle doo-hickeys...

midnite_drive

Retro Guru

perry

Sidewinder

Radical_53

Dirt Disciple

midnite_drive

Retro Guru

Sidewinder

Kona Paul

midnite_drive

Retro Guru

Kona Paul

Similar threads

Latest posts