The following jigsaw puzzle was made with only two precision tools on the right of the picture.
Instructions:
- Print out the picture. A3 is best. Colour not necessary but it may help.
- Carefully cut out the odd shaped pieces contained within the red square. Scissors
can be sharp so be carefull; you may need help from a grown up.
- Try to put all the odd shaped pieces together to form a well known bicycle component.
- Take a photo of the finished assembled cut-outs, and post it up here.
If successfull, you can use double sided sticky tape and transfer the assembled cut-outs to
a piece of cereal packet and hang it in your shed.
Depending on how well you do, I will make another jigsaw puzzle slightly more difficult
or easier.
Instructions:
- Print out the picture. A3 is best. Colour not necessary but it may help.
- Carefully cut out the odd shaped pieces contained within the red square. Scissors
can be sharp so be carefull; you may need help from a grown up.
- Try to put all the odd shaped pieces together to form a well known bicycle component.
- Take a photo of the finished assembled cut-outs, and post it up here.
If successfull, you can use double sided sticky tape and transfer the assembled cut-outs to
a piece of cereal packet and hang it in your shed.
Depending on how well you do, I will make another jigsaw puzzle slightly more difficult
or easier.
