Campornolo Resto

kingroon

Retrobike Rider
BoTM Winner
Gold Trader
98+ BoTM Winner
Feedback
View
So.. I picked up a Bike in rather a sorry state, but that I thought had hidden potential.. When it was dropped off to me, it was in slightly worse condition than I had anticipated, but hey, just meant the Resto Work would take a bit longer :cool:

8328522451_b6cc1562dd_z_d.jpg

8329578878_a81676f827_n_d.jpg
8328521505_a2ffd1d92c_n_d.jpg

8329579064_c432130a34_n_d.jpg
8328521685_655a2e3bac_n_d.jpg

8328521761_7390e9ab2a_n_d.jpg
8328521851_08f069a7b4_n_d.jpg

8328521921_dd35ffc487_n_d.jpg
8329579520_eb93ef58f5_n_d.jpg

8329579596_db86301489_n_d.jpg
8328522305_2d2e831285_n_d.jpg


Started with a disassembly, one that I believe had never happened before; certainly some of the parts had been on the frame since it was assembled in 1989/1990.. Gunge, Grit and Twenty Year Old Grease.. :twisted:

8329565582_fb1f54d8a8_m_d.jpg
8329567194_4cd83821d5_m_d.jpg
8329567738_b839d77723_m_d.jpg


The Rear Derailleur

8329568824_4a8d973f45_n_d.jpg


This was something else, I have never seen a Jockey Wheel so worn :shock: :LOL: The spring was slow to return the hanger to its sitting position, the quadrangle linkage was sluggish and the finish was dull.. Anyways, I warned my Knuckles they'd be in for a rough ride as I opened the Can o' Worms that is a Mech Disassembly..

8328512177_80c5f714d4_m_d.jpg
8328517493_11a676df03_n_d.jpg
8328517109_4811e24375_n_d.jpg


However, there are very few things as rewarding as returning to a State of Former Glory :cool:

8329574154_48dcd04583_z_d.jpg
 
These are the Brakes..

I've never owned a Campagnolo Rig before [a Driving Force for this Project] so had no idea if the mechanisms would vary from Shimano and/or Suntour Components. I knew it would be interesting to see the differences in ideas, particularly ingenious was that Campagnolo "reused" parts for either side of the bike [i.e. Left & Right]; this was most evident with regards the Brake Levers. Removing the lever arm from the Clamp, flipping it 180 Degrees and reattaching it would get you the opposite Brake.

8329567194_4cd83821d5_n_d.jpg
8329573792_5ed9ac8c3d_n_d.jpg


The Cantilevers are simply beautiful.. The Aztec Brake Blocks had seen some action so needed replacing; as Like For Liek as possible, I went with the newer generation Aztecs.

8328515747_7b5a1af17d_m_d.jpg
8328516169_b3e2c4d209_m_d.jpg
8329572686_f5d3aed618_n_d.jpg
 
That Italian stuff does scrub up well, doesn't it? Any idea what the frame is? You have inspired me to start my old mech cleaning session for my new road bike later

Ahem, if your backside doesn't get on with that saddle, I'm always looking for a new one of those...
 
Rollin', rollin', rollin'..

I was amazed at how well the components of this Gruppo had lasted, and not worn out completely; the hubs & bearings were testament to this. Sure the bearings needs some fresh gunk and the freewheel was beyond saving, but the bearings themselves and the hub bearing cups were in pretty good shape.

I snapped the rear axle during this part of the Resto, but that was an excuse to replace it with a CroMo unit [£18!] and upgrade it to 135mm..

8329579064_c432130a34_n_d.jpg
8328514373_9dd81cb80d_m_d.jpg
8329659452_7e17b5a40d_m_d.jpg


So, deciding to leave the Campagnolo Rims in favour of a set of Mavic MA40s was a difficult decision.. Moving away from a Complete Campag Build :roll: But.. The MA40s are more Period Correct, and a set of Dark Ano rims always look good with Skinwalls :cool:

Convincing the Fisher Fattrax Tyres to sit on the Mavics was however an entirely more difficult manoeuvre :shock:

8356506801_06e4c0fb98_n_d.jpg
8357570064_853c5d8df9_n_d.jpg
 
Rule of Thumb..

Over-engineered in appearance, but simplistic in design, the Thumbies are unmistakably Campagnolo :cool:

8219908803_876bc916ea_n_d.jpg
8219909425_7abc3de819_n_d.jpg
 
Long ago, a bloke in a bike shop explained the appeal of Campag by saying, "Campagnolo's components wear in, whilst everybody else's wear out."

Looks to be true!
 
Drivetrain

So I kinda cheated with the Chainset.. I went NOS.. This decision was fueled by the need to replace the Chain and Cassette; I figured I needed to mate a new Chainring Set with these.. Plus, it's always nice to get NOS :cool:

8356506177_d180edc228_n_d.jpg


You might notice I've used a Crank Extractor Bolt setup here, I do have some Syncros Crank-O-Matics on their way which will sit better than the new Ti units I have in there..
 
Cabling

Finding a complete set of NOS Campagnolo Cables in pearlescent white was something I had not expected, but I knew this was an opportunity that would enable me to really set this Gruppo off :cool:

The old Outers have seem some cable travel and are mismatched; my guess is that the original Campag' outers needed upgrading in a couple of cases.. I will however clean them up before installing the Newbies [this Weekend].. ;)

8328521685_655a2e3bac_n_d.jpg
8369327239_2f9f93bd0c_n_d.jpg
8370392862_e1c66e05cf_n_d.jpg
 
Back
Top