Hope Ti BB - 68mm and/or 73mm
- Thread starter Carge
- Start date
- Feedback
- View
Nothing to stop you putting it in, might be harder to use the lockrings.
Not dual they where dual use like others.
That 111 on there really 117 ?
As that the length the lockrings started at, below that you didn't have them.
Not dual they where dual use like others.
That 111 on there really 117 ?
As that the length the lockrings started at, below that you didn't have them.
Hi Fluff
I don't think the lockrings are actually Hope ones - as the blue is different.
The BB shell is actually 73mm wide - and the the axle is 113mm.
So with these - is it right that if you used em on a 68mm shell - you used the lockrings - and if you used it in a 73mm shell you didn't use the rings?
I don't think the lockrings are actually Hope ones - as the blue is different.
The BB shell is actually 73mm wide - and the the axle is 113mm.
So with these - is it right that if you used em on a 68mm shell - you used the lockrings - and if you used it in a 73mm shell you didn't use the rings?
- Feedback
- View
Carge":1a2mkir4 said:
The rings only came on 117+ lengths. I don't think the shell had anything to do with it.
One min..
Here. I've never had one as far as I can remember anyway.
Pics
http://www.retrobike.co.uk/gallery2/mai ... ewsIndex=1
& info
http://www.retrobike.co.uk/gallery2/mai ... ewsIndex=1
- Feedback
- View
When you test it out, you can report back 
