1992 Dyna Tech OGRE

Fenton

Senior Retro Guru
Picked this up at the weekend, completely original and in immaculate condition apart from the saddle, according to the chap I bought it from it has been ridden four times, never off road and never in any adverse weather conditions! The photos were taken before I spent a couple of hours cleaning it, it now looks like it has just come out of the showroom, I can only find one mark on it, a small paint chip on the forks. I bought it for the parts to build my Cannondale 'red shred' but I fear I may be becoming attached to it!!

IMG_1785.jpg


IMG_1786.jpg


Frame: Dyna-Tech Titanium 2125 Comp 2 with Ti. Chainstays
Fork: Dyna-Max Butted

Headset: ?
Stem: Zoom
Handlebar: Dyna-Tech Titanium
Grips: Grab-On Foam
Barends: X-Lite Ski Bend

Brakes: Dia-Compe 987 Black
Brake Pads: Dia-Compe
Brake Cables: Shimano SLR
Brake Levers: Dia-Compe SS7

Shifters: Shimano Deore XT Thumbshifters
Front Derailleur: Shimano Deore DX
Rear Derailleur: Shimano Deore DX
Cables: Shimano SIS
Cassette: Shimano Deore DX
Chain: Shimano Deore DX
Cranks: Shimano Deore DX
Chainrings: Shimano Deore DX
Bottom Bracket: Shimano Deore DX
Pedals: Shimano Deore LX

Hub Skewers: Shimano Deore DX
Rims: Mavic 232H
Hubs: Shimano Deore DX
Tyres: Tioga Mud Dawg/Trail Dawg

Saddle: Currently Titec
Seatpost: Dyna-Tech
 
Leave it whole if its factory fresh.

If you really must split, id be interested in the frame assuming its an 18" ;)
 
Seems to me all its missing is the seat and some factory fitted reflectors.
Very nice indeed.
Feel free to PM me what you picked it up for. ;)

Dave.
 
Edit for the above post.
I reckon thats even the orig seat too. :oops:
And bearings aint even 'bedded in' :shock:
Cracking.
I do like a Dyna and Ti? Wonderful.
D.
 
If it's 17" and you opt to sell it, my MT3 frame is headed tipward due to death by rusted seatstay. Could be interested in frame.....
 
Back
Top