Retrobike Forum Index

It is currently Sun Sep 20, 2020 3:07 pm

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Thu May 07, 2020 5:41 pm 
Retro Guru
User avatar

Joined: Sun Feb 01, 2009 9:27 pm
Posts: 1104
Location: Abingdon
Following on from a change of sponsor at the end of 1993, and being handed a temporary bike for the start of ‘94 (see here: viewtopic.php?f=6&t=410447), I was eventually issued with a new bike to use for the year – this time a fully rigid steel Specialized Stumpjumper in the highly desirable Grey Green colour combo.

Attachment:
1.jpg
1.jpg [ 346.7 KiB | Viewed 309 times ]


Whilst this could be considered as a step backwards from the previous bike in terms of catalogue rank, and perhaps a little bit surprising that even in ’94 front suspension wasn’t the norm for most bikes, this new bike was absolutely better than the last. It was light, responsive, and rapid, and meant it could easily be used to keep up with much higher end bikes – like my mate Pace RC200s…

Attachment:
2.jpg
2.jpg [ 529.43 KiB | Viewed 309 times ]

Attachment:
3.jpg
3.jpg [ 359.68 KiB | Viewed 309 times ]


The bike was race ready out of the box (save for a pair of SPDs), and I got to use some nice kit during the year including a one of those lovely Team issue Sub 6 Pro helmets;

Attachment:
4.jpg
4.jpg [ 399.99 KiB | Viewed 309 times ]


1994 wasn’t a particularly memorable year for results as I was at the bottom end of the Junior age category, so any decent results were probably few and far between, most probably from local events like the Gorrick race series - and I do recall a lot of pressure from the sponsor to perform well given the results from ’93, but it really was a case of ride and race as much as I can and hope for the best.

Sadly, as was the case with the ’93 FS, the sponsor required all kit back at the end of the year – including race clothing :( :roll: , so I have little more than some Specialized gloves to show for my time with the team. I did have the red Sub 6 Pro – but according to my folks this was thrown out years ago :( :facepalm: .

Attachment:
5.jpg
5.jpg [ 284.48 KiB | Viewed 309 times ]


I recall that one of my team mates at the time was girl called Wendy Cushing – she had a great year and was heading for even better results – so much so that she was offered and accepted sponsorship direct from Specialized UK for the next season. I remember how sad she was when she had to return all her kit to the sponsor, almost as though she felt she was deserting the team! :( .

This build was then of course based on having to find everything from scratch, in an attempt to do a catalogue build.

As fortune would have it, I was quick to spot a for sale post (in summer 2015) by Tc here on RetroBike of a complete (but not correct) bike, and after a few weeks a deal was done. Most importantly the frame, forks, stem, bars, seat post, saddle and a few other parts were correct so it required little to complete the build to catalogue spec.
We agreed to meet at a service station on the M4 midway between us – where some joker who saw us moving the bike from one car to another tried to intervene and ‘buy’ the bike off of us :facepalm: until his mate told him to stop being a c0ck and they drove off.

Attachment:
6.jpg
6.jpg [ 538.54 KiB | Viewed 309 times ]


Parts to be sourced/corrected were as follows;

• Wheels (it came with Alivio Hubs on 217 Sunset rims)
• Tyres (it came with a crusty set of grey Ritchey Z-Maxs’)
• ‘Brifters’ (it came with a mixed pair of later model 8-speed LX units)
• Rear Mech (it came with a later model 8spd LX mech)
• Cassette (it came with an 8spd unit)
• Toe-clips (it came with the correct pedals but no clips)

Thankfully none of the above posed too much of a challenge – just patience :) , with toeclips being the final piece to find earlier this year. Whilst the wheels I sourced have the correct rims, they have the earlier style thin LX hubs – so perhaps I’ll keep an eye open for a replacement pair of hubs, which again won’t be hard to find but means getting the wheels re-built, so no rush!

One challenge was the seat post, which as you can see from the pic above had a seized clamp which meant the saddle was pointing skyward :oops: . Initially I couldn’t get it to budge, so I put up a wanted ad for a replacement post, but thankfully after some brute force I managed to release the seized component allowing for proper adjustment. Though I have since ended up with another post and saddle anyway… :roll: .

As with my ’93 FS - this is not a garage queen. Specialized obviously didn’t believe in applying too many coats of clear lacquer and as a result many parts of or whole decals have gone. No drama though, still looks good enough to me :) .

Has to be said – this a great bike to ride :D .

Here’s the finished spec and pictures.

Frame: 18” Direct Drive Tange Prestige

Fork: Specialized Direct Drive

Headset: Dia-Compe Aheadset
Stem: Specialized Tahoma
Stem Cap: Dia-Compe
Handlebar: Specialized Heat Treated
Grips: Onza Ules, grey
Barends: N/A

Brakes: Shimano BR-M560 Deore LX
Brake Pads: Shimano M System
Brake Cables: Shimano
Cantilever cable hangers: Shimano
Brake Levers: Shimano ST-M560 Deore LX

Shifters: Shimano ST-M560 Deore LX
Front Derailleur: Shimano FD-M560 Deore LX
Rear Derailleur: Shimano RD-M560 Deore XT
Derailleur Cables: Shimano SIS
Cassette: Shimano Hyperglide 12-28t
Chain: Shimano
Cranks: Shimano FC-M560 Deore LX
Crank Bolts: Shimano
Chainrings: Shimano 42-32-22
Chainring bolts: Shimano
Bottom Bracket: Shimano
Pedals: Specialized Direct Drive Comp with toeclips

Rims: Specialized Z21 32H
Hubs: Shimano FH-M560 & HB-M560 Deore LX
Hub Skewers: Shimano
Nipples: Wheelsmith
Spokes: Wheelsmith
Tyres:
Front: Specialized Umma Gumma Cannibal S 1.95”
Rear: Specialized Umma Gumma More Extreme S 1.95”
Tubes: Rubber

Saddle: Specialized ProLong Perforated
Seat post: Specialized Tahoma Micro Adjust
Seat post Binder: Specialized Trick Release

Weight: 11.16kg / 24.6lbs

Attachment:
7.JPG
7.JPG [ 795.88 KiB | Viewed 309 times ]

Attachment:
8.JPG
8.JPG [ 858.47 KiB | Viewed 309 times ]


Top
 Profile  
 
 Post subject: Re:
PostPosted: Thu May 07, 2020 5:45 pm 
Retro Guru
User avatar

Joined: Sun Feb 01, 2009 9:27 pm
Posts: 1104
Location: Abingdon
More pics...


Attachments:
9.JPG
9.JPG [ 901.71 KiB | Viewed 307 times ]
10.JPG
10.JPG [ 687.79 KiB | Viewed 307 times ]
11.JPG
11.JPG [ 750.28 KiB | Viewed 307 times ]
12.JPG
12.JPG [ 482.08 KiB | Viewed 307 times ]
13.JPG
13.JPG [ 266.38 KiB | Viewed 307 times ]
14.JPG
14.JPG [ 492.13 KiB | Viewed 307 times ]
15.JPG
15.JPG [ 638.68 KiB | Viewed 307 times ]
16.JPG
16.JPG [ 448.37 KiB | Viewed 307 times ]
Top
 Profile  
 
PostPosted: Fri May 08, 2020 7:07 am 
Retro Guru
User avatar

Joined: Sun Jun 11, 2017 4:44 pm
Posts: 498
Location: Delamere Forest
Such a great colour, I have one the same that needs building. Looks great! 8)


Top
 Profile  
 
PostPosted: Fri May 08, 2020 11:37 am 
Retro Guru
User avatar

Joined: Sun Feb 01, 2009 9:27 pm
Posts: 1104
Location: Abingdon
G60MAT wrote:
Such a great colour, I have one the same that needs building. Looks great! 8)


Get it built! 8)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group