1993 Kona Cindercone

pencilman77

Retro Guru
Well seeing as I'm waiting for my 91 Explosif to come back from the paint shop, I couldn't resist picking up another frame for a quick project to keep me busy.

It arrived today and is in need of a little attention, here she is having been reassembled and me putting a few of my bits on it.
ZMBAKTba_Td_Ku_Aa_N6kt_Lh_QA.jpg


It does require a new seat post (the one fitted has been cut super short) and a correct size seat post clamp. Does anyone know what size I need for both?

I have everything else to get it built up (wheels coming at the weekend), I think the paint will polish up ok, with some silver touch ups required in a few places (have to find a close match)
 
Well seeing as my Explosif still isnt back yet :cry: I decided to get this finished....

Paintwork has plenty of "patina" but no dents or cracks and polished up pretty well. Got a nice wheelset from minifreak, so its got a good period mix of Deore XT, DX and a sprinkling of LX!

Hope you like it!
cc1.jpg

cc2.jpg

cc3.jpg

Specs:
Frame: 1993 Kona Cindercone 19”

Fork: Joe Murray Project 2 Triple Butted

Headset: Joe Murray Impact
Stem: Velocity
Handlebar: Club Roost
Grips: WTB Trail
Barends: none

Brakes: Shimano Deore LX Cantilevers
Brake Pads: Shimano M-System
Brake Cables: Jagwire
Cantilever cable hangers: Shimano
Brake Levers: Suntour XC Pro

Shifters: Shimano Deore DX Thumbshifters
Front Derailleur: Shimano Deore LX
Rear Derailleur: Shimano Deore XT M730 Short Cage
Derailleur Cables: Jagwire
Cassette: Shimano Hyperglide 12-28t 7 speed
Chain: SRAM PG830
Cranks: Shimano Deore XT M730
Crank Bolts: Shimano
Chainrings: Shimano HG
Chainring bolts: Shimano
Bottom Bracket: Shimano UN50
Pedals: Shimano Deore XT, Christophe toeclips & straps

Hub Skewers: Black QR
Rims: Ritchey Vantage Expert
Hubs: Shimano Deore DX
Nipples: Yes
Spokes: Definitely
Tyres: Maxxis Ignitor
Tubes: yes

Saddle: Selle Italia Turbo
Seatpost: ETC 26.4mm
 
:cool: thats looking nice now its finished.

Personally though i would have to run different tyres on it :)

mark
 
mkone":1jzz4val said:
:cool: thats looking nice now its finished.

Personally though i would have to run different tyres on it :)

mark

I completely agree about the tyres, but this was only a quick project while im waiting for my Explosif. I'll leave the tyre upgrade to the next owner!
 
I thought I'd do a little comparison, my 2017 Orbea Alma H50 29er, with the Cindercone in front, seats at the same height, only 24 years between them!
different.jpg
 
Back
Top