Mutiple splatter paint kona content, page 18/19 for latest builds

Re: Re:

mfhxgram":3hcc8gv0 said:
there was one on here that was a 16 that had no splatter - wonder if this it it with updated splatter :?

Yeah i remember that one it was on a while back,could well be that then with some splatter on it.
 
Re:

It's finally arrived in the post today the red 1990 Kona Lavadome. I've been hunting for one for ages now so when this popped up for sale i had to get it,in great survivor condition and perfect for what i've wanted to do for donkey's.
I never understood why they only done the yellow one in splatter and not the red or the white one,so i'm going to make my own :D

I'm sure most people are like me and normally have a certain part to start a build off,whether that be wheels a chainset or for me on this build a Mountain LX rear mech which is a bit shorter than they normally are.

So first up get that bottom bracket out and the headset,give it good clean and decide what colour or colours to splat on it.
 

Attachments

  • IMAG3813_2.jpg
    IMAG3813_2.jpg
    148.3 KB · Views: 636
  • IMAG3811_1_1.jpg
    IMAG3811_1_1.jpg
    210.9 KB · Views: 637
  • IMAG3812_1.jpg
    IMAG3812_1.jpg
    121.5 KB · Views: 637
  • IMAG3810_1.jpg
    IMAG3810_1.jpg
    103.3 KB · Views: 637
Muddy paw":vsthcm2p said:
Turquoise and pale pink splatter ;-) .

I'm definitely going with a bright blue first then i'm going to see if it should have another colour added,maybe white :)
Should be fun :D
 
Re:

Bottom bracket and the headset are out got to be one of the easiest cup and cone bb's i've tackled yet,no brute force required :)

The frame and forks have been washed,cream cleaned and one coat of polish and the red has come up a treat,very red when you see it close up.
There's a little bit of wear and tear to the paint and stickers but nothing a little touch up won't sort out plus with it getting splatted it'll cover some of those areas anyway.

Colours to splat it with,yellow mmm not sure at the minute with that one i've put a couple of drops of blue and white on the frame to have a look.
Definitely going with that blue i can picture the whole bike covered in it being very eye catching and it'll certainly stand out :D and i think the white might work aswell with not to much of it put on.
 

Attachments

  • IMAG3822_1.jpg
    IMAG3822_1.jpg
    224.4 KB · Views: 546
  • IMAG3821_1.jpg
    IMAG3821_1.jpg
    163.7 KB · Views: 546
  • IMAG3823_1.jpg
    IMAG3823_1.jpg
    116.3 KB · Views: 547
  • IMAG3815_1.jpg
    IMAG3815_1.jpg
    247.9 KB · Views: 548
  • IMAG3819_1_1_1.jpg
    IMAG3819_1_1_1.jpg
    213.9 KB · Views: 548
  • IMAG3817_1.jpg
    IMAG3817_1.jpg
    215 KB · Views: 547
  • IMAG3818_1.jpg
    IMAG3818_1.jpg
    158.7 KB · Views: 546
  • IMAG3825_1.jpg
    IMAG3825_1.jpg
    111.1 KB · Views: 545
Re:

Progress update on the Lavadome.

Just a few more things to do and it'll be finished,i decided not to splat the bike because i'm going to be moving it on once it's built up and after cleaning it up it's in such good survivor condition it would be a shame to ruin it. I tried a little bit of splatting but just wasn't happy with the outcome so cleaned the paint off again,if i can get hold of a 91 or 92 Kona sometime which is a bit beat up i'll splat that instead.

I found those mythos tyres in the loft and for me they set the bike off perfectly and the velocity stem was a no brainer for me because i always like the look of a flat stem it gives the bike a racing look,plays havoc with your back but looks are more important :LOL: . So the only things left to do is give the seatube a better clean so the post moves more freely that's why it's where it is now on the photos,there's some new pedals on the way,new cables are sorted and i'm going to polish the crankarms some more.

Next update will be it finished and ready for sale.
 

Attachments

  • IMAG3869_1.jpg
    IMAG3869_1.jpg
    152.6 KB · Views: 485
  • IMAG3866_1.jpg
    IMAG3866_1.jpg
    161.1 KB · Views: 486
  • IMAG3867_1.jpg
    IMAG3867_1.jpg
    178.7 KB · Views: 486
  • IMAG3868_1.jpg
    IMAG3868_1.jpg
    218.5 KB · Views: 485
  • IMAG3870_1.jpg
    IMAG3870_1.jpg
    178.3 KB · Views: 484
Re:

Merry Christmas everyone :xmas-big-grin:

The Lavadome is finished and i think it's a great way to finish off this whole overhauling build thread. This bike i think sums up the whole theme of the thread perfectly and is probably out of all the Konas i've done has gave me the greatest satisfaction when it was completed,yes i'm chuffed with it :D :LOL:
I went with mostly Mountain LX parts because it's sort of the forgotten groupset with it only being available for one year. And with the frameset being in such great condition and all the nice shiny parts on the bike i got the idea to put all the new reflectors and spoke guard on the bike,i like the look :)
Now though it's time to move it on for a new owner to own and enjoy it so if anyone is interested drop me a pm.

Spec of the bike is.
F&F's: Tange double butted with P2's.
Headset: Mountain LX.
Stem: Kona Velocity.
Bars: Specialized.
Seatpost: Kalloy (i think :LOL: )
Saddle: Avocet Racing 1.
Grips: New Ritchey WCS.
Brake Levers: Mountain LX nos.
Cantilevers: Deore LX.
New cables,Shimano straddles,fixing bolts.
Shifters: Mountain LX nos.
Front Mech: Mountain LX.
Rear Mech: Mountain LX (converted to short cage)
Chainset: Mountain LX with Biopace rings.
BB:new Shimano un55.
Cassette:Shimano HG70.
Pedals: new Wellgo comp style.
Toeclips: new Bigfoot clips with new MT Christophe straps.
Cables:All new.
Hubset: Shimano Deore DX.
Rims: Araya RX 7.
Tyres: new Charge Splashbacks.
 

Attachments

  • IMAG3900_1.jpg
    IMAG3900_1.jpg
    139.7 KB · Views: 422
  • IMAG3899_1.jpg
    IMAG3899_1.jpg
    321.8 KB · Views: 421
  • IMAG3898_1.jpg
    IMAG3898_1.jpg
    194.2 KB · Views: 422
  • IMAG3901_1.jpg
    IMAG3901_1.jpg
    181.4 KB · Views: 422
  • IMAG3896_1.jpg
    IMAG3896_1.jpg
    154.6 KB · Views: 422
  • IMAG3897_1.jpg
    IMAG3897_1.jpg
    189.8 KB · Views: 421
Very nice mate, GLWS :)

Merry Christmas :xmas-cool:
 
Back
Top