Retrobike
http://www.retrobike.co.uk/forum/

Riser bars
http://www.retrobike.co.uk/forum/viewtopic.php?f=46&t=409308

Author:  chris2222 [ Thu Apr 09, 2020 9:57 pm ]
Post subject:  Riser bars

Anyone got any spare riser bars pref with a 30mm clamp size and wider the better. Just building my inbred back up and want to try a wider bar . Cheers chris

Author:  mk one [ Thu Apr 09, 2020 10:01 pm ]
Post subject:  Re: Riser bars

Hi Chris. Did you mean 31.8 size? i have a few spare if so, where abouts are you as its a pain to post at moment.

Mark

Author:  Jan Marten [ Thu Apr 09, 2020 10:33 pm ]
Post subject:  Re: Riser Bars

Any chance you have ±720 x 25.4mm?

Jan

Author:  chris2222 [ Fri Apr 10, 2020 12:40 am ]
Post subject:  Re:

it is 31.8 mm I’m after if anyone has any and I live in the midlands

Author:  Madmax1993 [ Mon Apr 13, 2020 4:37 pm ]
Post subject:  Re:

Chris, I have a sunline bar which is 31.8mm clamp diameter, and 750-760mm long

Jan, I have a Tranz-x bar with 25.4mm clamp dia and is about 640-650mm long.

I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.
I have attached photos for both of you

Attachments:
IMG_13042020_162031_(900_x_191_pixel).jpg
IMG_13042020_162031_(900_x_191_pixel).jpg [ 35.22 KiB | Viewed 337 times ]
IMG_13042020_162058_(900_x_181_pixel).jpg
IMG_13042020_162058_(900_x_181_pixel).jpg [ 29.99 KiB | Viewed 337 times ]

Author:  greencat [ Mon Apr 13, 2020 4:44 pm ]
Post subject:  Re: Re:

Madmax1993 wrote:

I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.


One way I got around this with some bars I had to send was to pack them diagonally. It moved from from one parcel size category into another.

Author:  Madmax1993 [ Mon Apr 13, 2020 4:49 pm ]
Post subject:  Re: Re:

greencat wrote:
Madmax1993 wrote:

I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.


One way I got around this with some bars I had to send was to pack them diagonally. It moved from from one parcel size category into another.


Duly noted. It's ironic that this makes it cheaper, as you're adding a lot of volume compared to a long, thin parcel, but that's courier companies for you I guess.

Author:  Jan Marten [ Mon Apr 13, 2020 5:09 pm ]
Post subject:  Re: Riser Bars

Hi Madmax,
I have 650mm at the moment. Looking for at least 720mm, preferably 25 or 30mm rise.

Author:  chris2222 [ Mon Apr 13, 2020 5:10 pm ]
Post subject:  Re:

Thanks guys - I am all sorted and have acquired a set.

Author:  Madmax1993 [ Mon Apr 13, 2020 5:36 pm ]
Post subject:  Re:

Jan, I'm sure I can find a stem to go with the sunline bar if you want to jump to 31.8mm?

All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/