Riser bars

chris2222

Devout Dirtbag
Anyone got any spare riser bars pref with a 30mm clamp size and wider the better. Just building my inbred back up and want to try a wider bar . Cheers chris
 
Hi Chris. Did you mean 31.8 size? i have a few spare if so, where abouts are you as its a pain to post at moment.

Mark
 
Re:

Chris, I have a sunline bar which is 31.8mm clamp diameter, and 750-760mm long

Jan, I have a Tranz-x bar with 25.4mm clamp dia and is about 640-650mm long.

I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.
I have attached photos for both of you
 

Attachments

  • IMG_13042020_162058_(900_x_181_pixel).jpg
    IMG_13042020_162058_(900_x_181_pixel).jpg
    30 KB · Views: 353
  • IMG_13042020_162031_(900_x_191_pixel).jpg
    IMG_13042020_162031_(900_x_191_pixel).jpg
    35.2 KB · Views: 353
Re: Re:

Madmax1993":4jj12ptk said:
I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.

One way I got around this with some bars I had to send was to pack them diagonally. It moved from from one parcel size category into another.
 
Re: Re:

greencat":2xvjpyld said:
Madmax1993":2xvjpyld said:
I could do them for £15 each, posted, subject to me checking the postage costs. I think bars can be a bit pricey to send due to the length of them.

One way I got around this with some bars I had to send was to pack them diagonally. It moved from from one parcel size category into another.

Duly noted. It's ironic that this makes it cheaper, as you're adding a lot of volume compared to a long, thin parcel, but that's courier companies for you I guess.
 
Back
Top