Hope Bulb Freehub body.

Well Well Well. A reply :shock:
I have a spare but its been through the wars and come off worst. The mounting of the cassette has left some marks as expected but nothing that would cause a problem.
The issue is that the inner bearing has split apart through rust and the outer shell of the bearing which is all thats left is resisting my attempts to drift it out. You'd need the right tool for the job here and i dont have one. Nor have i identified it yet :LOL:
Plus i left it in the oven @230c for about 30 minutes .

Oh and an hour in a caustic mix so strong i had to do it outside. the alloy spacer was squeezed in so i had to dissolve a portion of it to get it free.
So what you have is a bulb freehub body, blackened from heat and with a steel outer bearing ring, thats difficult to access and right at the bottom and probably seized to the side.

Still interested :LOL:
£5
This covers- Post. Packaging,bus to PO and a can of coke while i stand in the queue quietly sniggering to myself over the problems youre about to face :D

Still interested ? Drop me a PM ;)
 
Re:

hello.
thanks very much for the offer, but i've since found one stashed away in a box...
sorry it took me a while to get back.
regards,
al.
 

Latest posts

Back
Top