Gussyboy79
Retro Newbie
I'm in a bit of a pickle, I have a Scott G-Zero Pro and recently had to have the pivot arm bracket re-welded for the rear shock, a couple of weeks riding after the repair the sleeve for the pivot bearing on the crank ring side worked its way out and never to be found again.
I have called my local Scott dealer who I bought the bike off 12 years ago and the bearing is no longer available, does anyone have one laying around or a solution to my problem as it seems a shame to write off the bike over a missing bearing sleeve.
The owners manual gives part number as follows: 15.1.860.101.0.000. (From Scott) or 3803.2.RS AVAILABLE FROM "local hardware stores
The part numbers are the same across the following models: G-Zero competition, G-Zero FX, strike competition, strike FX & Octane
Any help gratefully received
Cheers
Gus
I have called my local Scott dealer who I bought the bike off 12 years ago and the bearing is no longer available, does anyone have one laying around or a solution to my problem as it seems a shame to write off the bike over a missing bearing sleeve.
The owners manual gives part number as follows: 15.1.860.101.0.000. (From Scott) or 3803.2.RS AVAILABLE FROM "local hardware stores
The part numbers are the same across the following models: G-Zero competition, G-Zero FX, strike competition, strike FX & Octane
Any help gratefully received
Cheers
Gus