Just a disc and bolts please!
- Thread starter samc
- Start date
- Feedback
- View
I have a brake disc that you can have for postage, ill get some details on it later.
you get the mounts according to the disc size, the mount is the bit that the caliper bolts to which inturn then bolts to the forks. most modern calipers are either post mount (where the mounting bolts m6 are bolted into the ends of the mount/fork or IS mount where they are bolted into the sides of the mount/fork.
most mounts will have a size on them reffering to the disc size they will accomodate.
thats about as much as I know.
most mounts will have a size on them reffering to the disc size they will accomodate.
thats about as much as I know.
Attachments
regarding disc sizes, as a general rule you can run up to 203mm on the front with the correct mount and the same on the back. running a large disc on the back can foul the stays so you need to measure first but inless you have an odd hub/fork combo up front (like older hope) you can run pretty much any size you want. 180 is the norm I think but a lot of people go for 203 for the extra stopping power/bling factor.
also superstar components are selling a lot of their floating rotors off cheap to clear them
http://superstar.tibolts.co.uk/product_ ... cts_id=455 for the rotors
http://superstar.tibolts.co.uk/product_ ... cts_id=359 for the mounts
http://superstar.tibolts.co.uk/product_ ... cts_id=546 for the bolts
also superstar components are selling a lot of their floating rotors off cheap to clear them
http://superstar.tibolts.co.uk/product_ ... cts_id=455 for the rotors
http://superstar.tibolts.co.uk/product_ ... cts_id=359 for the mounts
http://superstar.tibolts.co.uk/product_ ... cts_id=546 for the bolts
- Feedback
- View
widowmaker":1fp4vmya said:
Unfortunately the 2 I have are 160 mm
If anyone wants them they can have them !
Similar threads
