110 or 113 x 68mm JIS BB axle or complete BB (cup & cone)

Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

Bump - very much still in need. Cartridge BBs won't fit the frame due to sleeve in the shell :(
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

I might have one of these, not sure on the state of the bearing races though...

What's the sleeve in the shell?
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

Cheers foz. Frame is a c.1990 Raleigh MTB frame, low end steel, has a thin sleeve with what looks like half a ball bearing at bottom of seat tube, it protrudes so a cartridge won't go in. It won't budge, it's definitely not an old BB bearing stuck in the hole!
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

Sounds a bit strange, any pics? Will go and have a look for that spindle...
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

foz":38a3cn5f said:
Sounds a bit strange, any pics? Will go and have a look for that spindle...

It certainly is! Have gazed at it for a good while and its definitely 'meant to be there' even though I've fitted cartridge BBs in similar frames before... reason I need to do so is owner of bike has a more modern Alivio chainset he wants fitting and it requires shorter than OE axle.

Thanks for looking sir.
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

Found it! shimano 600, 68mm shell, 113mm spindle length. There's a nasty section of pitting on one of the cones though. Will still turn round, but might not be too smooth... I thought I had another one in better condition, but it's not in the box of bits so is either hiding or in use somewhere!

if you can use it, it's yours for postage (which is a fiver from here (Spain) :oops:)

Andy
 

Attachments

  • DSCN0040.JPG
    DSCN0040.JPG
    57.1 KB · Views: 191
  • DSCN0039.JPG
    DSCN0039.JPG
    69 KB · Views: 191
  • DSCN0037.JPG
    DSCN0037.JPG
    70.7 KB · Views: 191
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

Thanks very much for the pics foz, however as you say it has fairly nasty pitting though so I'm going to pass. Cheers, Al
 
Re: 110 or 113 x 68mm JIS BB axle or complete BB (cup & cone

No problem - you know where it is if you need it :LOL:

good luck with the search!

Andy
 
Back
Top