David Hoffman
Retro Newbie
I'm looking to replace the cones etc in my mid '80s Camapg Nuovo Tipo hubs.
The front cones are stamped "CAMP 9 x 26". I think those numbers refer to the thread, the cones measure 15.8mm diameter x 11.4mm deep. I expect that my 15.8mm is 16mm nominal.
The rear is a 126mm/6 speed QR. I've not had it apart to measure the cones but can do if that's needed.
I don't know if the inner races would need replacing or even if that's possible. Advice gratefully received!
TIA
David Hoffman
The front cones are stamped "CAMP 9 x 26". I think those numbers refer to the thread, the cones measure 15.8mm diameter x 11.4mm deep. I expect that my 15.8mm is 16mm nominal.
The rear is a 126mm/6 speed QR. I've not had it apart to measure the cones but can do if that's needed.
I don't know if the inner races would need replacing or even if that's possible. Advice gratefully received!
TIA
David Hoffman
