80's Dura ace 7400 wanted

SNight

Retro Guru
Im after either or really.....

Could do with;

Dura ace 7400 brakeset calipers & levers SORTED

A Dura ace "aero" seatpost 27.2mm SORTED

dura ace PD 7401 pedals

dura ace 7400 headset SORTED

dura ace 7400 hub set SORTED

dura ace QR skewers to match SORTED

dura ace 7400 crank dust capsSORTED

Just putting the feelers out to get an idea of what is available and at what cost. Just aquired a 1986 Walvale with a mix of dura ace / 600. Ideally I would like to complete the bike with dura ace.

Any replies appreciated, cheers.
 
I thought I posted already, but I try again:

P1050229_zps55dfee6c.jpg

P1050228_zpsf2648f4e.jpg

P1050228_zpsf2648f4e.jpg


20 euro for the 600, 25 for the DuraAce, posted to the UK.
What hubs are you looking for?

I might have some of these left:

P1020281.jpg
 
I've some 600 levers (Calipers too if required), a headset I think, and I've a pair of mavic open reflex rims on tricolor hubs if any good.
 
Inmish Ed":3volb952 said:
I've some 600 levers (Calipers too if required), a headset I think, and I've a pair of mavic open reflex rims on tricolor hubs if any good.

Hi inmish, thanks for the response, but after a think, im going to try and go for full dura ace. Just about to change the post heading.

Thanks anyway,
Sean.
 
I have a good used 7400 front hub 32H £25 (no skewer though).

I do have NOS 7403 brakes calipers, NOS 7401 hubsets UG 36H, 7400 7 speed UG cassettes 13-19T, NOS FD-7400 28.6mm clamp.

None of the NOs parts are cheap mind.
 
Back
Top