Retrobike Forum Index

It is currently Tue Nov 13, 2018 6:49 am

* Login   * Register * Search  * FAQ

Forum rules


**Classified Rules & Guidance - Feedback - Dispute Procedure - Gold Trader Status - All Adverts Need A Price - 5 Adverts Maximum - Leave Prices In Sold Adverts - No cross posting adverts**



Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 57-58cm steel frameset
PostPosted: Tue Oct 16, 2018 6:17 pm 
Dirt Disciple

Joined: Thu Oct 15, 2015 2:10 pm
Posts: 18
I'm after a steel frameset with a budget of around £150 max.

Horizontal dropouts, one colour paint scheme

Please let me know what you have, based in London so may need shipping


Last edited by j_808 on Wed Oct 17, 2018 6:25 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Oct 16, 2018 7:09 pm 
Retro Guru

Joined: Wed Nov 12, 2014 6:34 pm
Posts: 281
Location: Carmarthenshire
I've still got these

viewtopic.php?f=22&t=348299&hilit=raleigh

Any good to you?

Ignore this, I thought they had horizontal drop outs but they don't.


Last edited by spitball on Tue Oct 16, 2018 7:25 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Oct 16, 2018 7:15 pm 
retrobike rider
retrobike rider

Joined: Fri Aug 13, 2010 10:14 pm
Posts: 3330
Location: Cheshire
viewtopic.php?f=47&t=383524

Sell complete or strip it to frame and fork and anything else you want on it


Top
 Profile  
 
PostPosted: Tue Oct 16, 2018 8:03 pm 
Retro Guru

Joined: Wed Jun 22, 2011 5:59 pm
Posts: 375
Location: Gloucester
Ive got a 'Chas Bland' 531c frame and forks. He was building frames for local racers in the South Glos, Bristol area.

It's abit big for me, I'm just over 5'10" so would suit someone an inch taller. Built as a 'crit' frame the bb is slightly higher to keep you pedalling through the corners. The lugs look to be cast all round, way too good looking for pressed ones, shot in rear stays and an aero fork crown. Wheelbase isn't stupid tight (2 finger gap)so it handles like a well put together steel frame should.

I managed to break a rear dropout when I broke an axle, he repaired it and I did the finishing...took an hour each side. Rode it a further 12 months without a problem before trading up to 653.

Looking for £100 plus post.

PM me an email and I'll send a load of pictures.

Comes with seatpost and headset, HS needs a clean and grease for sure.


Attachments:
Rolling chassis.jpg
Rolling chassis.jpg [ 82.32 KiB | Viewed 67 times ]


Last edited by Way2many on Mon Oct 22, 2018 9:32 pm, edited 1 time in total.
Top
 Profile  
 
 Post subject: Re:
PostPosted: Tue Oct 16, 2018 10:11 pm 
Retro Guru
User avatar

Joined: Thu May 20, 2010 9:03 am
Posts: 2149
Location: Bodmin,Cornwall.
Spitball they do have horizontal dropouts !!


Top
 Profile  
 
PostPosted: Tue Oct 16, 2018 11:24 pm 
Dirt Disciple

Joined: Sun Apr 17, 2016 11:36 pm
Posts: 48
Location: Warsaw/Poland
I'm selling the frame: Wilier Triestina probably - Modello Speciale 1976
size 58 cm cc seat tube
59 cc top tube
The fork is not original Wilier.


Attachments:
DSC_0439.JPG
DSC_0439.JPG [ 322.67 KiB | Viewed 268 times ]
Top
 Profile  
 
PostPosted: Wed Oct 17, 2018 8:45 am 
Retro Guru

Joined: Fri Mar 02, 2012 7:46 pm
Posts: 832
Cougar Terry Dolan made frameset, headset, forks in white. No dents or nasty scratches, some paint damage from when the seatpost was removed chemically earlier in the year (dissolved the alloy seatpost, did not affect the steel).

In Reynolds 731os :)

I am also in London on Saturday...


Top
 Profile  
 
PostPosted: Wed Oct 17, 2018 6:24 pm 
Dirt Disciple

Joined: Thu Oct 15, 2015 2:10 pm
Posts: 18
Filovintage wrote:
I'm selling the frame: Wilier Triestina probably - Modello Speciale 1976
size 58 cm cc seat tube
59 cc top tube
The fork is not original Wilier.


How much?


Top
 Profile  
 
PostPosted: Wed Oct 17, 2018 6:28 pm 
Dirt Disciple

Joined: Thu Oct 15, 2015 2:10 pm
Posts: 18
Way2many wrote:
Ive got a 'Chas Bland' 531c frame and forks. He was building frames for local racers in the South Glos, Bristol area.

It's abit big for me, I'm just over 5'10" so would suit someone an inch taller. Built as a 'crit' frame the bb is slightly higher to keep you pedalling through the corners. The lugs look to be cast all round, way too good looking for pressed ones, shot in rear stays and an aero fork crown. Wheelbase isn't stupid tight (2 finger gap)so it handles like a well put together steel frame should.

I managed to break a rear dropout when I broke an axle, he repaired it and I did the finishing...took an hour each side. Rode it a further 12 months without a problem before trading up to 653.

Looking for £100 plus post.

PM me an email and I'll send a load of pictures.


Pm'd you, can you let me know the seat tube ctc and upload pics when you get a chance. thanks


Top
 Profile  
 
PostPosted: Wed Oct 17, 2018 8:39 pm 
Retro Guru

Joined: Wed Jun 22, 2011 5:59 pm
Posts: 375
Location: Gloucester
j_808 wrote:
Way2many wrote:
Ive got a 'Chas Bland' 531c frame and forks. He was building frames for local racers in the South Glos, Bristol area.

It's abit big for me, I'm just over 5'10" so would suit someone an inch taller. Built as a 'crit' frame the bb is slightly higher to keep you pedalling through the corners. The lugs look to be cast all round, way too good looking for pressed ones, shot in rear stays and an aero fork crown. Wheelbase isn't stupid tight (2 finger gap)so it handles like a well put together steel frame should.

I managed to break a rear dropout when I broke an axle, he repaired it and I did the finishing...took an hour each side. Rode it a further 12 months without a problem before trading up to 653.

Looking for £100 plus post.

PM me an email and I'll send a load of pictures.


Pm'd you, can you let me know the seat tube ctc and upload pics when you get a chance. thanks


Will do, its hanging in the garage at the mo...

I'll measure seat tube, top tube as ctc and total headtube length.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group