2011/12 Reba - how to increase to 120m??

SteveKlein · Feb 24, 2014

So I have a set of the above and after going on SRAM's website its not clear wether you remove all spacers to get 120mm or leave in a certain amount of spacers.

Has anyone done this and if so how did you do it. (I was hoping to find a youtube vid but haven't had much success!) :facepalm:

suburbanreuben · Feb 24, 2014

What travel do you have at the moment? Spacers are 20 or 10mm. Take out the right millimetreage to get to 120mm. if you already have 100mm travel, take out a 20mm spacer, etc.
Rebas are a bit vague at 120mm though...

WD Pro · Feb 24, 2014

Does this help ? : viewtopic.php?f=41&t=263618&hilit=travel

and this ? :

WD Pro":3ruz9zr8 said:
From this :

To this :

By removing the 20mm spacer :

I used these instructions :

http://faqload.com/faqs/bicycle-compone ... vel-spacer

And bought these sockets :

I filed the chamfers off the 24mm socket to give it full engagement with the flat ally head on the forks (to minimise the potential for it to slip) - worked perfect

WD

WD

2011/12 Reba - how to increase to 120m??

SteveKlein

Old School Hero

suburbanreuben

Old School Grand Master

WD Pro

Similar threads

Latest posts