Just removed the outer ring on my tripple chainset and put on a bash ring i am using the bottom two gears on the shifter and just reset the higher mech stop to stop it going over the bash ring. Two things do i shorten my chain to help with tension and do i lower my front mech down and reset the lower adjuster to stop it going over the granny ring
bash rings
- Thread starter bolly
- Start date
If you have ditched a 44t outer & middle ring is 32t, then you might need to remove about 6 links (half of the difference between 44 & 32).
Best method is to set the chain on big cassette to big (old middle) chainring including THROUGH the rear mech & shorten chain so that rear mech is tight but still creates an S shape in the chain as it passes through the jockeys.
Best method is to set the chain on big cassette to big (old middle) chainring including THROUGH the rear mech & shorten chain so that rear mech is tight but still creates an S shape in the chain as it passes through the jockeys.
Similar threads
