Advice on 160mm to 180mm adaptors.

Kona-Ian

Senior Retro Guru
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
pretty sure your callipers are post mount so the second adapter you list is no good.

if your forks are post mount, then you will need longer bolts.
 
Thanks for the replies,

Should have given a bit more info, my fault.

Ok, have got proper frame and fork mounts for the disc brakes.
Running Formula oro k18 hydraulic set up.

Currently running a 160mm front disc and just need the adaptor just to run the 180mm disc.
:D
 
Sorted........... :D




P1000344-1.jpg
 
Looks like you have two adapters on there though? An IS one to shift the caliper out and then an IS to post mount bolted on that.

Am I seeing that right?
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BertR00t":z3b83vfb said:
Looks like you have two adapters on there though? An IS one to shift the caliper out and then an IS to post mount bolted on that.

Am I seeing that right?
That's what it looks like to me too (although it is early and phone pics only).
The link provided above is for IS to IS but the caliper is post mount?
 
Back
Top