Rear shock stroke
- Thread starter makster
- Start date
Just take how many inches travel you have at the rear and divide by the current stroke length.
So if you are around 3x ratio then you are going to gain 15mm at the rear wheel....which is probably fine.
This wouldn't be perfect but worst case you could fatten up the bottom out bumper on the shock shaft to shorten the travel to 50mm. (May effect damping curve)
So if you are around 3x ratio then you are going to gain 15mm at the rear wheel....which is probably fine.
This wouldn't be perfect but worst case you could fatten up the bottom out bumper on the shock shaft to shorten the travel to 50mm. (May effect damping curve)
