dirtydozen
Gold Trader
- Feedback
- View
Just got my new forks on so thought i would snap a pic
my GT LTS3000 ds
- Thread starter dirtydozen
- Start date
dirtydozen
Gold Trader
- Feedback
- View
ann summers were doing a free gift with every purchase and these were my gift, was a really nice surprise 
dirtydozen
Gold Trader
- Feedback
- View
just below noleen
Nice Dolly Parton forks
sorry, I thought they said Jolene
Just one thing, have you checked your Critical Measurement as found here... http://idriders.com/proflex/resources/98crosslink_manual.pdf
It looks like the forks are already compressed at a standstill?
sorry, I thought they said Jolene
Just one thing, have you checked your Critical Measurement as found here... http://idriders.com/proflex/resources/98crosslink_manual.pdf
It looks like the forks are already compressed at a standstill?
dirtydozen
Gold Trader
- Feedback
- View
its more like 160mm, if i made it 163mm the stem wouldnt fit, it just fit like it is :cry:
even so where do i get a 3mm spacer
even so where do i get a 3mm spacer
2.5mm spacer would do but I wouldnt worry about 5mm....... :? I was running mine at about 161...and then at 167 by swapping spacers about and didnt have a problem either way
just measure between the top of your tyre and the bottom of the steerer and make sure it is more than the travel thats all
just measure between the top of your tyre and the bottom of the steerer and make sure it is more than the travel thats all
dirtydozen
Gold Trader
- Feedback
- View
im worried now gonna take em off n start again. But if i add even a 2.5 spacer the stem defo wnt fit.
