Retrobike Forum Index

It is currently Fri Nov 16, 2018 1:09 am

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: 2000 junior t help
PostPosted: Sat Jun 16, 2018 9:40 pm 
Retro Guru

Joined: Tue May 23, 2017 2:29 pm
Posts: 355
Right guys been lurking on here for ages but this i my first question so please be gentle.

Recently bought some y2k junior t’s (20mm axle) off eBay which are in great nic, fitted them but when I put the wheel in (big un) the wheel spacing is wrong it measures 110mm which corresponds with the service guide I have found but can’t find any info on the spacing or what hub might fit. Any body got any ideas??

Thanks

Tim


Top
 Profile  
 
 Post subject: Re: 2000 junior t help
PostPosted: Tue Jun 19, 2018 9:57 pm 
Dirt Disciple

Joined: Fri Mar 17, 2017 2:01 pm
Posts: 78
The fork is too wide for the hub or vice versa?

I’d never heard of a non 100mm oln front hub/fork in mtbing until boost came along.


Top
 Profile  
 
 Post subject: Re:
PostPosted: Tue Jun 19, 2018 10:09 pm 
Retro Guru
User avatar

Joined: Sun Feb 08, 2015 8:51 am
Posts: 2255
Location: Macclesfield, Cheshire
Piccies might help show the problem.

You got the right spacers / cones on the hub?


Top
 Profile  
 
 Post subject: Re: 2000 junior t help
PostPosted: Tue Jun 19, 2018 10:46 pm 
Retro Guru

Joined: Tue May 23, 2017 2:29 pm
Posts: 355
mechanicalvandal wrote:
The fork is too wide for the hub or vice versa?

I’d never heard of a non 100mm oln front hub/fork in mtbing until boost came along.


Neither had I but according to this manual for the 2000 junior t.

Image

Also a couple of responses to the same question over on Stw have said that 20mm standard is 110 but I have not had chance measure any of my other forks/hubs yet


Top
 Profile  
 
 Post subject: Re:
PostPosted: Wed Jun 20, 2018 5:39 am 
Retro Guru
User avatar

Joined: Sun Feb 08, 2015 8:51 am
Posts: 2255
Location: Macclesfield, Cheshire
Qr20 different to standard 20mm bolt thru?

There was another post on here just the other day about that


Top
 Profile  
 
 Post subject: Re: Re:
PostPosted: Wed Jun 20, 2018 7:42 am 
Retro Guru

Joined: Tue May 23, 2017 2:29 pm
Posts: 355
RickTheUncivil wrote:
Qr20 different to standard 20mm bolt thru?

There was another post on here just the other day about that


I’ve tried to search rick but am comming up short on another post about this?

I’m also struggling to find any in do on weather 20mm bolt through and qr20 are different. I should be able to check my other forks today which are bolt through to see but I am expecting them to be 100mm


Top
 Profile  
 
 Post subject: Re: Re:
PostPosted: Wed Jun 20, 2018 9:43 am 
Retro Guru
User avatar

Joined: Sun Feb 08, 2015 8:51 am
Posts: 2255
Location: Macclesfield, Cheshire
Timoth27 wrote:

I’ve tried to search rick but am comming up short on another post about this?

I’m also struggling to find any in do on weather 20mm bolt through and qr20 are different. I should be able to check my other forks today which are bolt through to see but I am expecting them to be 100mm



Your post here where you say that QR20 and bolt-thru are different: viewtopic.php?f=46&t=385525

"I’ve bought a y2k marzocchi bomber junior t fork not realising that qr20 is not the same 20 bolt through"


Top
 Profile  
 
 Post subject: Re:
PostPosted: Wed Jun 20, 2018 8:16 pm 
Retro Guru

Joined: Tue May 23, 2017 2:29 pm
Posts: 355
Well that’s embarrassing. I really must stop and think before posting stuff.

So hope have confirmed all 20mm axles are 110mm. I had sort of figured this as I managed to measure my other forks/hubs today. The reason my big un doesn’t fit is I have clearly mixed up the spacers because it measures 105mm.

Thanks for the input folks. Bottom line is I’m an impatient muppet. But I did learn that 20mm axles are all 110mm.


Top
 Profile  
 
 Post subject: Re:
PostPosted: Wed Jun 20, 2018 8:35 pm 
Retro Guru
User avatar

Joined: Sun Feb 08, 2015 8:51 am
Posts: 2255
Location: Macclesfield, Cheshire
Didn't know that myself, so thanks for sharing your lesson :-)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group